NCIE-SAN Specialist NS0-520 Dumps Full Questions with Free PDF Questions to Pass [Q104-Q125]

Rate this post

NCIE-SAN Specialist NS0-520 Dumps Full Questions with Free PDF Questions to Pass

100% Updated Network Appliance NS0-520 Enterprise PDF Dumps

Network Appliance NS0-520 Exam Syllabus Topics:

Topic Details
Topic 1
  • ONTAP SAN implementation and configuration
  • Describe switch configuration concepts
Topic 2
  • Demonstrate knowledge of storage space utilization or management concepts
  • Describe storage space utilization or management concepts
Topic 3
  • Identify that all prerequisites for the installation of NetApp® system, hosts, and FCP
  • FCoE switches are verified
  • Demonstrate knowledge of clustered storage system node configuration tasks

 

NO.104 An administrator is configuring their Ethernet switches to support an AFF A300 cluster that will be providing iSCSI LUNs to servers. The switches are also used for other traffic from various hosts.
In this scenario, which statement about the switch configuration is correct?

 
 
 
 

NO.105 Click the Exhibit button.

An administrator is trying to configure a multiple-hop Cisco MDS switch and is receiving the error shown in the exhibit.
In this scenario, which action will solve this problem?

 
 
 
 

NO.106 Which option needs to be set on a volume to guarantee that it cannot be affected by other volumes?

 
 
 
 

NO.107 Your company has begun to require additional restrictions on systems in the cloud. To comply with these new restrictions, you must have all incoming connections authorized to your Cloud Volumes ONTAP instance in Amazon Web Services (AWS).
Which two features enable you to satisfy your company’s requirements for Red Hat Enterprise Linux 7 iSCSI hosts? (Choose two.)

 
 
 
 

NO.108 You want to provision an iSCSl LUN.
Which two steps are required to accomplish this task? (Choose two.)

 
 
 
 

NO.109 What are two benefits of implementing VLANs for ISCSI configuration? (choose two)

 
 
 
 

NO.110 A storage administrator is setting up a Red Hat Enterprise Linux 8.1 system to use NVMe storage in ONTAP 9.7.
In this scenario, which action is required?

 
 
 
 

NO.111 A customer recently added two nodes with FC ports to a 4-node cluster.
Which SVM configuration is needed before the customer creates LUNs on the new nodes?

 
 
 
 

NO.112 Exhibit.

You are adding a boot LUN for a new server. The server uses FCP attached through a CNA.
The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.
What is the problem with your zoning configuration?

 
 
 
 

NO.113 You have a thin-provisioned LUN that was created by using the lun create -vserver vs1 – path /vol/vol1/lun1 -size 500G -ostype windows 2008 -space-reserve disabled -space-allocation disabled command. You verify that your Windows 2016 host reports 200 GB free on lun1. However, lun1 shows 0 bytes free on the storage cluster.
What should you do to solve this problem?

 
 
 
 

NO.114 You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled.
Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?

 
 
 
 

NO.115 When does Fractional Reservation reserve space from the volume?

 
 
 
 

NO.116 An administrator is asked to provide enhanced security measures to an iSCSI LUN using the Challenge Handshake Authentication Protocol (CHAP) with the iscsi security create command.
In this scenario, for which two objects should the administrator configure CHAP? (Choose two.)

 
 
 
 

NO.117 You are designing a new 4-node AFF A400 SAN cluster with 20 ISCSI hosts. Each AFF A400 node will have four data LIFs. Each ISCSI host needs to access every LUN over two LIFs per node on every SAN node.
In this scenario, which Netapp SAN feature enable this connectivity?

 
 
 
 

NO.118 You have a SAN host that is only sending traffic to an ONTAP cluster using active non-optimized paths. In this scenario, over which network type does the node that is hosting the target LUN receive the traffic?

 
 
 
 

NO.119 Click the Exhibit button.

A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?

 
 
 
 

NO.120 Exhibit.

You are moving volumes between aggregate aft_01_aggr1 and the aggregate Aggr_Data shown in the exhibit.
How much space will be moved?

 
 
 
 

NO.121 You are planning to implement a 32 Gb FC SAN on a 2-node AFF A700 ONTAP 9.5 cluster. You need to create 112 FC LIFs across the HA pair with a limit of 20 FC LIFs per physical HBA port.
In this scenario, how many 2-port 32 Gb HBA cards do you need per storage controller?

 
 
 
 

NO.122 An administrator is planning a hardware refresh and data migration from a Data ONTAP 7.3 system to new AFF A3-00 cluster that is using ONTAP 9.0. The Mode system only serves FC LUNs to a Windows 2012Rs server cluster that needs to remain connected after migration Referring to the scenario, which method would be used for the LUN migration.

 
 
 
 

NO.123 You have inherited a small FC SN infrastructure that consists of 15 servers (hosts), two Cisco MDS 9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your predecessor did not configure zoning according to best practices.
In this scenario, what information is necessary to audit your SAN zoning? (Choose two.)

 
 
 
 

NO.124 Click the Exhibit button.

An administrator enabled the FC protocol on an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Referring to the exhibit, which two steps must the administrator take to solve this problem? (Choose two.)

 
 
 
 

NO.125 Exhibit.

Referring to the exhibit, which type of zoning should be used?

 
 
 
 

NetApp NS0-520 Exam Certification Details:

Duration 90 minutes
Recommended Training ONTAP SAN Fundamentals (WBT)
SAN Administration
SAN Implementation (ILT)
Exam Price $150 USD
Exam Name Implementation Engineer SAN Specialist, ONTAP
Exam Code NS0-520 NCIE SAN Specialist, ONTAP
Exam Registration PEARSON VUE
Number of Questions 60
Sample Questions NetApp NS0-520 Sample Questions

 

Use Valid Exam NS0-520 by PrepAwayTest Books For Free Website: https://www.prepawaytest.com/NetworkAppliance/NS0-520-practice-exam-dumps.html

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below