[Jun 09, 2022] Get New HPE6-A73 Certification – Valid Exam Dumps Questions [Q47-Q71]

NO.47 How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers9

NO.48 A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?

NO.49 Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

NO.50 A company requires access by all users guests, and employees to be authenticated Employees will be authenticated using 802 1X. whereas guests will be authenticated using captive portal Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?

NO.51 Examine the attached diagram

Two AOS-CX switches are configured for VSX at the access layer, where servers attached to them. An SVI interface is configured for VLAN 10 and serves as the default gateway for VLAN 10. The ISL link between the switches fails, but the keepalive interface functions. Active gateway has been configured on the switches.
What is correct about access from the servers to the Core?

NO.52 An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?

NO.53 Examine the network exhibit.

A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?

NO.54 A network engineer is using NetEdit to manage AOS-CX switches. The engineer notices that a lot of third-party VoIP phonesare showing up in the NetEdit topology The engineer deletes these, but they are automatically rediscovered by NetEdit andadded back in What should the administrator do to solve this problem?

NO.55 Examine the AOS-CS switch output:

Based on this output, what is correct?

NO.56 An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

NO.57 What is correct regarding policy-based routing?

NO.58 An administrator is managing a network comprised of AOS-CX switches deployed at the aggregation layer. The switches are paired in a VSX stack and run the OSPF routing protocol. The administrator is concerned about how long it takes for OSPF to converge when one of the VSX switches has to reboot.
What should the administrator to do speed up the OSPF convergence of the switch that is rebooting?

NO.59 What must a network administrator implement in order to run an NAE script on an AOS-CX switch?

NO.60 Examine the attached exhibit.

The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?

NO.61 A company has just purchased AOS-CX switches. The company has a free and open-source AAA solution.
The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?

NO.62 How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?

NO.63 An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:

Based on this output, what is the state of the user’s access?

NO.64 An administrator in a company of 349 users has a pair of AOS-CX switches with connections to external networks. Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?

NO.65 A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?

NO.66 Which concept is implemented using Aruba’s dynamic segmentation?

NO.67 A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS’CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?

NO.68 Examine the network exhibit:

The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)

NO.69 An administrator has configured the following on an AOS-CX switch:

What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?

NO.70 An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone’s LAN port is connected to the switch.
Which statement is correct about this situation?

NO.71 A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?