Latest [Feb 22, 2023] 350-401 Exam Dumps – Valid and Updated Dumps [Q113-Q136]

Latest [Feb 22, 2023] 350-401 Exam Dumps – Valid and Updated Dumps

Free Sales Ending Soon – 100% Valid 350-401 Exam Dumps with 630 Questions

Tips for the preparation for the exam:

Develop a study plan that is suited to your time and schedule, and you will be able to pass the test in your first attempt. You can also study with your study partner or friend. You both friends can learn more, by avoiding distraction and by sharing knowledge. Simulations will also help you in understanding the subject and concepts. Architecting Cisco IP Service Provider Networks (IPSPN) Cisco 350-401 Exam covers almost all the topics that will be in the exam. Verified Cisco Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 exam dumps will help you clear the Managing Industrial Networks with Cisco Networking Technologies (IMINS) 350-401 test in your first attempt. Ensure your success in the Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam.

Introduced 350-401 exam questions resources for candidates to score high in the Cisco 350-401 Exam. Pass Exam successfully by preparing from the Leading Provider of Preparation Materials, your best choice for 350-401 exam certification. Redundancy questions and answers for the Cisco 350-401 Exam. Cisco 350-401 Dumps enables you to pass Cisco 350-401 Exam certification. All the questions and accurate answers are supported by Cisco experts. Instant understanding of Managing Industrial Networks with Cisco Networking Technologies (IMINS) Cisco 350-401 Exam. Make your preparation for the exam swift and easy by using the CertTutor study material. It is quite time-consuming and difficult to get certified and prepared for 350-401 exam. Comments and reviews like these will help you to score high in the exam.

Testing is a thorough review of all the material you have learned in class. If you have been studying for weeks or months, preparation time can add up to a full week just for review. Rating yourself is not an effective way to determine how prepared you are for the exam.

Here are the topics of Cisco 350-401 Exam

Candidates should know the exact exam topics before they start preparing for the exam. Because it will very help them in hitting the core. Guides to passing the exam are available online. Our Cisco 350-401 Dumps will include the following topics:

• Architecture 15%
• Security 20%
• Network Assurance 10%
• Automation 15%
• Virtualization 10%

Recommended Online Course: Implementing Cisco Enterprise Network Core Technologies

This is the official training course for 350-401. It confirms if you have the skills relating to configuring, troubleshooting, and managing enterprise wireless and wired networks. Here, you will master the implementation of security principles within enterprise networks and also build a comprehensive knowledge of overlaying network design as far as SD-WAN and SD-Access solutions are involved. Generally, this instructor-led training is meant to run for 8 days, which includes a combination of self-study options with a hands-on lab environment. However, with the eLearning option, students will also validate their skills using videos, challenges, and practice. According to Cisco, the four most popular roles that are well-suited to this course include associate-level network engineers, networking administrators, network support technicians, and help desk technicians. By taking this class, you will be proving your dedication to professional growth by indicating that you are ready to configure and manage enterprise networks and deploy security principles. Finally, all candidates should have the following skills before registering for this course:

• Fundamentals skills in Python scripting.
• Implementing enterprise LAN networks;
• Basic knowledge of wireless connectivity and Enterprise routing;

QUESTION 113

Refer to the exhibit. Which configuration must be applied to R to enable R to reach the server at 172.16.0.1?

 

 

 

 

QUESTION 114
Which protocol is used to encrypt control plane traffic between SD-WAN controllers and SD-WAN endpoints?

 DTLS

 IPsec

 PGP

 HTTPS

Datagram Transport Layer Security es un protocolo que proporciona privacidad en las comunicaciones para protocolos de datagramas.

QUESTION 115
Which statement about agent-based versus agentless configuration management tools is true?

 Agentless tools require no messaging systems between master and slaves.

 Agentless tools use proxy nodes to interface with slave nodes.

 Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.

 Agent-based tools do not require installation of additional software packages on the slave nodes.

Agentless tool means that no software or agent needs to be installed on the client machines that are to be managed. Ansible is such an agentless tool. In contrast to agentless tool, agent-based tool requires software or agent to be installed on the client. Therefore the master and slave nodes can communicate directly without the need of high-level language interpreter.
An agentless tool uses standard protocols, such as SSH, to push configurations down to a device (and it can be considered a “messaging system”).

QUESTION 116
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right

Explanation

QUESTION 117
Drag and drop the descriptions from the left onto the routing protocol they describe on the right.

QUESTION 118
Which network devices secure API platform?

 next-generation intrusion detection systems

 Layer 3 transit network devices

 content switches

 web application firewalls

Reference: https://www.cisco.com/c/en/us/products/collateral/security/advanced-waf-bot-aag.pdf
> Cisco Secure Web Application Firewall (WAF) and bot protection defends your
> online presence and ensures that website, mobile applications, and APIs
> are secure, protected, and “always on.”

QUESTION 119
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.

QUESTION 120
Refer to the exhibit.

What is the JSON syntax that is formed the data?

 Name: Bob, Johnson, Age: 76, Alive: true, Favourite Foods. [Cereal, “Mustard”, “Onions}}

 Name’, ‘Bob Johnson,’ ‘Age’, 76, ‘Alive’, true, ‘favourite Foods’ ‘Cereal Mustard’, ‘Onions’}

 {“Name”:”Bob Johnson”,”age”:76,”alive”:true,”favorite
foods”:[“Cereal”,”Mustard”,”Onions”]}correct

 Name”, “Bob Johnson”, “Age”, 76, “Alive”, true, “favourite Foods”, [“Cereal, “Mustard”, Onions”}}

 Name”, “Bob Johnson”, “Age”: Seventysix, “Alive” true, “favourite Foods” ,[Cereal” “Mustard” “Onions”}}

QUESTION 121
Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.

Explanation
On premise: customizable,specific requirements,resources
Cloud: scale, built-in automated backup, strong stable internet

QUESTION 122
Refer to the exhibit.

Which configuration establishes EBGP neighborship between these two directly connected neighbors and exchanges the loopback network of the two routers through BGP?
A)

B)

C)

D)

 Option A

 Option B

 Option C

 Option D

Explanation
With BGP, we must advertise the correct network and subnet mask in the “network” command (in this case network 10.1.1.0/24 on R1 and network 10.2.2.0/24 on R2). BGP is very strict in the routing advertisements. In other words, BGP only advertises the network which exists exactly in the routing table. In this case, if you put the command “network x.x.0.0 mask 255.255.0.0” or
“network x.0.0.0 mask 255.0.0.0” or “network x.x.x.x mask 255.255.255.255” then BGP will not advertise anything.
It is easy to establish eBGP neighborship via the direct link. But let’s see what are required when we want to establish eBGP neighborship via their loopback interfaces. We will need two commands:
+ the command “neighbor 10.1.1.1 ebgp-multihop 2” on R1 and “neighbor 10.2.2.2 ebgpmultihop
2″ on R1. This command increases the TTL value to 2 so that BGP updates can reach the BGP neighbor which is two hops away.
+ Answer ‘R1 (config) #router bgp 1
R1 (config-router) #neighbor 192.168.10.2 remote-as 2
R1 (config-router) #network 10.1.1.0 mask 255.255.255.0
R2 (config) #router bgp 2
R2 (config-router) #neighbor 192.168.10.1 remote-as 1
R2 (config-router) #network 10.2.2.0 mask 255.255.255.0
Quick Wireless Summary
Cisco Access Points (APs) can operate in one of two modes: autonomous or lightweight
+ Autonomous: self-sufficient and standalone. Used for small wireless networks.
+ Lightweight: A Cisco lightweight AP (LAP) has to join a Wireless LAN Controller (WLC) to function.
LAP and WLC communicate with each other via a logical pair of CAPWAP tunnels.
– Control and Provisioning for Wireless Access Point (CAPWAP) is an IETF standard for control messaging for setup, authentication and operations between APs and WLCs. CAPWAP is similar to LWAPP except the following differences:
+CAPWAP uses Datagram Transport Layer Security (DTLS) for authentication and encryption to protect traffic between APs and controllers. LWAPP uses AES.
+ CAPWAP has a dynamic maximum transmission unit (MTU) discovery mechanism.
+ CAPWAP runs on UDP ports 5246 (control messages) and 5247 (data messages) An LAP operates in one of six different modes:
+ Local mode (default mode): measures noise floor and interference, and scans for intrusion detection (IDS) events every 180 seconds on unused channels
+ FlexConnect, formerly known as Hybrid Remote Edge AP (H-REAP), mode: allows data traffic to be switched locally and not go back to the controller. The FlexConnect AP can perform standalone client authentication and switch VLAN traffic locally even when it’s disconnected to the WLC (Local Switched). FlexConnect AP can also tunnel (via CAPWAP) both user wireless data and control traffic to a centralized WLC (Central Switched).
+ Monitor mode: does not handle data traffic between clients and the infrastructure. It acts like a sensor for location-based services (LBS), rogue AP detection, and IDS
+ Rogue detector mode: monitor for rogue APs. It does not handle data at all.
+ Sniffer mode: run as a sniffer and captures and forwards all the packets on a particular channel to a remote machine where you can use protocol analysis tool (Wireshark, Airopeek, etc) to review the packets and diagnose issues. Strictly used for troubleshooting purposes.
+ Bridge mode: bridge together the WLAN and the wired infrastructure together.
Mobility Express is the ability to use an access point (AP) as a controller instead of a real WLAN controller. But this solution is only suitable for small to midsize, or multi-site branch locations where you might not want to invest in a dedicated WLC. A Mobility Express WLC can support up to 100 Aps

QUESTION 123
What is the recommended MTU size for a Cisco SD-Access Fabric?

 1500

 9100

 4464

 17914

QUESTION 124
Refer to the exhibit.

Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20?

 spanning-tree mst 1 priority 1

 spanning-tree mst 1 root primary

 spanning-tree mstp vlan 10,20 root primary

 spanning-tree mst vlan 10,20 priority root

 spanning-tree mst 1 priority 4096

QUESTION 125
An engineer has deployed a single Cisco 5520 WLC with a management IP address of 172.16.50.5/24. The engineer must register 50 new Cisco AIR-CAP2802I-E-K9 access points to the WLC using DHCP option 43.
The access points are connected to a switch in VLAN 100 that uses the 172.16.100.0/24 subnet. The engineer has configured the DHCP scope on the switch as follows:

The access points are failing to join the wireless LAN controller. Which action resolves the issue?

 configure option 43 Hex F104.AC10.3205

 configure option 43 Hex F104.CA10.3205

 configure dns-server 172.16.50.5

 configure dns-server 172.16.100.1

Explanation
172.16.50.5 in hex is
We will have the answer from this paragraph:
“TLV values for the Option 43 suboption: Type + Length + Value. Type is always the suboption code 0xf1.
Length is the number of controller management IP addresses times 4 in hex. Value is the IP address of the controller listed sequentially in hex. For example, suppose there are two controllers with management interface IP addresses, 192.168.10.5 and 192.168.10.20. The type is 0xf1. The length is 2 * 4 = 8 = 0x08. The IP addresses translates to c0a80a05 (192.168.10.5) and c0a80a14 (192.168.10.20). When the string is assembled, it yields f108c0a80a05c0a80a14. The Cisco IOS command that is added to the DHCP scope is option 43 hex f108c0a80a05c0a80a14.” Reference:
https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/97066-dhcp-option-43-00.html Therefore in this question the option 43 in hex should be “F104.AC10.3205 (the management IP address of
172.16.50.5 in hex is AC.10.32.05).

QUESTION 126
Refer to the exhibit.

What is the effect of introducing the sampler feature into the Flexible NetFlow configuration on the router?

 NetFlow updates to the collector are sent 50% less frequently.

 Every second IPv4 packet is forwarded to the collector for inspection.

 CPU and memory utilization are reduced when compared with what is required for full NetFlow.

 The resolution of sampling data increases, but it requires more performance from the router.

Reference: https://github.com/aabc/pkt-netflow

QUESTION 127
Which two steps are required for a complete Cisco DNA Center upgrade? (Choose two.)

 golden image selection

 automation backup

 proxy configuration

 application updates

 system update

QUESTION 128
What are two common sources of interface for WI-FI networks? (Choose two.)

 radar

 LED lights

 rogue AP

 conventional oven

 fire alarm

Interference between different WLANs occurs when the access points within range of each other are set to the same RF channel.
Microwave ovens emit damaging interfering signals at up to 25 feet or so from an operating oven.
Some microwave ovens emit radio signals that occupy only a third of the 2.4-GHz band, whereas others occupy the entire band.
Reference: https://www.ciscopress.com/articles/article.asp?p=2351131&seqNum=2

QUESTION 129
Drag and drop the snippets onto the blanks within the code to construct a script that shows all logging that occurred on the appliance from Sunday until 9:00 p.m Thursday Not all options are used.

QUESTION 130
Drag and drop the Qos mechanisms from the left to the correct descriptions on the right

Explanation

QUESTION 131
Which two Cisco SD-Access components provide communication between traditional network elements and controller layer? (choose two)

 network data platform

 network underlay

 fabric overlay

 network control platform

 partner ecosystem

QUESTION 132
An engineer is troubleshooting the Ap join process using DNS. Which FQDN must be resolvable on the network for the access points to successfully register to the WLC?

 wlcbostname.domain.com

 cisco-capwap-controller.domain.com

 ap-manager.domain.com

 primary-wlc.domain.com

Explanation
DNS: If you have configured your DHCP server to provide both option 006 (DNS server address) and option
015 (domain name) information, the AP can obtain WLC addresses from the DNS server. The process works as follows:
1. The AP gets its IP address from DHCP with options 6 and 15 configured.
2. The AP can obtain the IP address of the DNS server from the DHCP option.
3. The AP uses this information to perform a hostname lookup using
CISCO-CAPWAP-CONTROLLER.<localdomain>, which resolves to available WLC management interface IP addresses (IPv4 or IPv6, or both).
4. The AP can then perform a directed message to associate to responsive WLCs.
To prevent all APs from joining a single controller based on a DNS name resolution, the domain name may vary; this is what is done to dispatch APs to different controllers across the enterprise network, based on different domain names that are configured in their respective DNS scopes.

QUESTION 133
A response code of 404 is received while using the REST API on Cisco UNA Center to POST to this URI.
/dna/intent/api/v1 /template-programmer/project
What does the code mean?

 The client made a request a resource that does not exist.

 The server has not implemented the functionality that is needed to fulfill the request.

 The request accepted for processing, but the processing was not completed.

 The POST/PUT request was fulfilled and a new resource was created, Information about the resource is in the response body.

The 404 (Not Found) error status code indicates that the REST API can’t map the client’s URI to a resource but may be available in the future. Subsequent requests by the client are permissible.

QUESTION 134
Refer to the exhibit.

VPN-A sends point-to-point traffic to VPN-B and receives traffic only from VPN-C VPN-B sends point-to-point traffic to VPN-C and receives traffic only from VPN-A Which configuration is applied?
A)

B)

 Option A

 Option B

QUESTION 135
Which statement about Cisco Express Forwarding is true?

 It uses a fast cache that is maintained in a router data plane.

 maintains two tables in the data plane the FIB and adjacency table.

 It makes forwarding decisions by a process that is scheduled through the IOS scheduler.

 The CPU of a router becomes directly involved with packet-switching decisions.

QUESTION 136
Refer to the exhibit.

R2 is the neighboring router of R1. R2 receives an advertisement for network 192 168.10.50/32. Which configuration should be applied for the subnet to be advertised with the original /24 netmask?
A)

B)

C)

D)

 Option A

 Option B

 Option C

 Option D

 Loading …

350-401 Exam Dumps – 100% Marks In 350-401 Exam: https://www.prepawaytest.com/Cisco/350-401-practice-exam-dumps.html