2023 100-101 Premium Files Test pdf - Free Dumps Collection [Q21-Q44]

NEW QUESTION 21
Refer to the exhibit.

SwitchA receives the frame with the addressing shown in the exhibit. According to the command output also shown in the exhibit, how will SwitchA handle this frame?

It will drop the frame.

It will forward the frame out port Fa0/6 only.

It will forward the frame out port Fa0/3 only.

It will flood the frame out all ports.

It will flood the frame out all ports except Fa0/3.

NEW QUESTION 22
Refer to the exhibit.

The two connected ports on the switch are not turning orange or green. What would be the most effective steps to troubleshoot this physical layer problem? (Choose three.)

Ensure that the Ethernet encapsulations match on the interconnected router and switch ports.

Ensure that cables A and B are straight-through cables.

Ensure cable A is plugged into a trunk port.

Ensure the switch has power.

Reboot all of the devices.

Reseat all cables.

NEW QUESTION 23
Refer to the exhibit.

After configuring two interfaces on the HQ router, the network administrator notices an error message. What must be done to fix this error?

The serial interface must be configured first.

The serial interface must use the address 192.168.1.2

The subnet mask of the serial interface should be changed to 255.255.255.0

The subnet mask of the FastEthernet interface should be changed to 255.255.255.240

The address of the FastEthernet interface should be changed to 192.168.1.66

NEW QUESTION 24
What does a host on an Ethernet network do when it is creating a frame and it does not have the destination address?

drops the frame

sends out a Layer 3 broadcast message

sends a message to the router requesting the address

sends out an ARP request with the destination IP address

NEW QUESTION 25
Refer to the exhibit.

A network administrator has configured a Catalyst 2950 switch for remote management by pasting into the console the configuration commands that are shown in the exhibit. However, a Telnet session cannot be successfully established from a remote host. What should be done to fix this problem?

Change the first line to interface fastethernet 0/1.

Change the first line to interface vlan 0/1.

Change the fifth line to ip default-gateway 192.168.17.241.

Change the fifth line to ip route 0.0.0.0 0.0.0.0 192.168.17.1.

Change the sixth line to line con 0.

NEW QUESTION 26
Which three approaches can be used while migrating from an IPv4 addressing scheme to an IPv6 scheme? (Choose three)

static mapping of IPv4 address to IPv6 addresses

configuring IPv4 tunnels between IPv6 islands

use DHCPv6 to map IPv4 addresses to IPv6 addresses

use proxying and translation (NAT-PT) to translate IPv6 packets into IPv4 packets

configure IPv6 directly

enable dual-stack routing

NEW QUESTION 27
In which major section of Ads Manager (found in the top navigation bar) would you prepare mockup ad campaigns?

Manage Business

Advertise

Engage Customers

NEW QUESTION 28
Refer to the exhibit.

A network device needs to be installed in the place of the icon labeled Network Device to accommodate a leased line attachment to the Internet. Which network device and interface configuration meets the minimum requirements for this installation?

a router with two Ethernet interfaces

a switch with two Ethernet interfaces

a router with one Ethernet and one serial interface

a switch with one Ethernet and one serial interface

a router with one Ethernet and one modem interface

NEW QUESTION 29
At what level in Ads Manager would a business choose their ad placements?

Campaign

Ad

Ad set

Account

NEW QUESTION 30
What is the main difference between the Brand Awareness and Engagement objectives?

Brand Awareness optimizes for ad recall white Engagement optimizes for likes/shares/comments

Brand Awareness optimizes for likes/shares/comments, while Engagement optimizes for ad recall

Brand Awareness optimizes for conversions, white Engagement optimizes for views

Brand Awareness optimizes for views, while Engagement optimizes for conversions

NEW QUESTION 31
A company has placed a networked PC in a lobby so guests can have access to the corporate directory. A security concern is that someone will disconnect the directory PC and re-connect their laptop computer and have access to the corporate network. For the port servicing the lobby, which three configuration steps should be performed on the switch to prevent this? (Choose three.)

Enable port security.

Create the port as a trunk port.

Create the port as an access port.

Create the port as a protected port.

Set the port security aging time to 0.

Statically assign the MAC address to the address table.

Configure the switch to discover new MAC addresses after a set time of inactivity.

NEW QUESTION 32
Refer to the exhibit.

SwitchA receives the frame with the addressing shown. According to the command output also shown in the exhibit, how will SwitchA handle this frame?

It will drop the frame.

It will forward the frame out port Fa0/3 only.

It will flood the frame out all ports.

It will flood the frame out all ports except Fa0/3.

NEW QUESTION 33
Which statements describe the routing protocol OSPF? (Choose three.)

It supports VLSM.

It is used to route between autonomous systems.

It confines network instability to one area of the network.

It increases routing overhead on the network.

It allows extensive control of routing updates.

It is simpler to configure than RIP v2.

NEW QUESTION 34
Which command can you use to manually assign a static IPV6 address to a router interface?

ipv6 address PREFIX_1::1/64

ipv6 autoconfig 2001:db8:2222:7272::72/64

ipv6 autoconfig

ipv6 address 2001:db8:2222:7272::72/64

NEW QUESTION 35
An administrator has connected devices to a switch and, for security reasons, wants the dynamically learned MAC addresses from the address table added to the running configuration.
What must be done to accomplish this?

Enable port security and use the keyword sticky.

Set the switchport mode to trunk and save the running configuration.

Use the switchport protected command to have the MAC addresses added to the configuration.

Use the no switchport port-security command to allow MAC addresses to be added to the configuration.

NEW QUESTION 36
A switch has 48 ports and 4 VLANs. How many collision and broadcast domains exist on the switch (collision, broadcast)?

4, 48

48, 4

48, 1

1, 48

4, 1

NEW QUESTION 37
Which two statements describe the process identifier that is used in the command to configure OSPF on a router? (Choose two.)
Router(config)# router ospf 1

All OSPF routers in an area must have the same process ID.

Only one process number can be used on the same router.

Different process identifiers can be used to run multiple OSPF processes

The process number can be any number from 1 to 65,535.

Hello packets are sent to each neighbor to determine the processor identifier.

NEW QUESTION 38
What are the benefits of Facebook pixel? (Choose all that apply)

Helps advertisers reach the right people

Measures the results of an ad across devices

Measures in-app activity

Helps advertisers to create ad mock-ups

NEW QUESTION 39
An ecommerce advertiser wants to target similar customers based on a current customer CRM seed list When type of audience targeting should be used to accomplish this?

Interest-Based Targeting

Targeting the Past 30 days of Website Visitors

Lookalike Audience

Custom Audience

NEW QUESTION 40
Two routers named Atlanta and Brevard are connected by their serial interfaces as shown in the exhibit, but there is no data connectivity between them. The Atlanta router is known to have a correct configuration.

Given the partial configurations shown in the exhibit, what is the problem on the Brevard router that is causing the lack of connectivity?

A loopback is not set.

The IP address is incorrect.

The subnet mask is incorrect.

The serial line encapsulations are incompatible.

The maximum transmission unit (MTU) size is too large.

The bandwidth setting is incompatible with the connected interface.

NEW QUESTION 41
Refer to the exhibit.

The network is converged.After link-state advertisements are received from Router_A, what information will Router_E contain in its routing table for the subnets 208.149.23.64 and 208.149.23.96?

208.149.23.64[110/13] via 190.173.23.10, 00:00:07, FastEthemet0/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0

208.149.23.64[110/1] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, FastEthemet0/0

208.149.23.64[110/13] via 190.173.23.10, 00:00:07, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, Serial1/0 208.149.23.96[110/13] via 190.173.23.10, 00:00:16, FastEthemet0/0

208.149.23.64[110/3] via 190.172.23.10, 00:00:07, Serial1/0 208.149.23.96[110/3] via 190.173.23.10, 00:00:16, Serial1/0

NEW QUESTION 42
Refer to the exhibit.

All devices attached to the network are shown. How many collision domains are present in this network?

2

3

6

9

15

NEW QUESTION 43
Which layer of the OSI model controls the reliability of communications between network devices using flow control, sequencing and acknowledgments?

Physical

Data-link

Transport

Network

There are many services that can be optionally provided by a transport-layer protocol, and different protocols may or may not implement them. Connection-oriented communication: It is normally easier for an application to interpret a connection as a data stream rather than having to deal with the underlying connection-less models, such as the datagram model of the User Datagram Protocol (UDP) and of the Internet Protocol (IP). Byte orientation: Rather than processing the messages in the underlying communication system format, it is often easier for an application to process the data stream as a sequence of bytes. This simplification helps applications work with various underlying message formats. Same order delivery: The network layer doesn’t generally guarantee that packets of data will arrive in the same order that they were sent, but often this is a desirable feature. This is usually done through the use of segment numbering, with the receiver passing them to the application in order. This can cause head-of-line blocking. Reliability: Packets may be lost during transport due to network congestion and errors. By means of an error detection code, such as a checksum, the transport protocol may check that the data is not corrupted, and verify correct receipt by sending an ACK or NACK message to the sender. Automatic repeat request schemes may be used to retransmit lost or corrupted data. Flow control: The rate of data transmission between two nodes must sometimes be managed to prevent a fast sender from transmitting more data than can be supported by the receiving data buffer, causing a buffer overrun. This can also be used to improve efficiency by reducing buffer underrun. Congestion avoidance: Congestion control can control traffic entry into a telecommunications network, so as to avoid congestive collapse by attempting to avoid oversubscription of any of the processing or link capabilities of the intermediate nodes and networks and taking resource reducing steps, such as reducing the rate of sending packets. For example, automatic repeat requests may keep the network in a congested state; this situation can be avoided by adding congestion avoidance to the flow control, including slow-start. This keeps the bandwidth consumption at a low level in the beginning of the transmission, or after packet retransmission. Multiplexing: Ports can provide multiple endpoints on a single node. For example, the name on a postal address is a kind of multiplexing, and distinguishes between different recipients of the same location. Computer applications will each listen for information on their own ports, which enables the use of more than one network service at the same time. It is part of the transport layer in the TCP/IP model, but of the session layer in the OSI model.

NEW QUESTION 44
What action would a business want its customers to take if it selects Conversions as its campaign objective?

Like a post

Provide an email address

Make a purchase

Install an app

View a video

2023 100-101 Premium Files Test pdf – Free Dumps Collection [Q21-Q44]

Leave a Reply Cancel reply