Verified CKA dumps Q&As - 100% Pass from PrepAwayTest [Q18-Q40]

NEW QUESTION 18
Score: 7%

Task
First, create a snapshot of the existing etcd instance running at https://127.0.0.1:2379, saving the snapshot to
/srv/data/etcd-snapshot.db.

Next, restore an existing, previous snapshot located at /var/lib/backup/etcd-snapshot-previo us.db

NEW QUESTION 19
Monitor the logs of pod foo and:
* Extract log lines corresponding to error
unable-to-access-website
* Write them to/opt/KULM00201/foo

NEW QUESTION 20
A bootstrap USB flash drive has been prepared using a Windows workstation to load the initial configuration of a Palo Alto Networks firewall that was previously being used in a lab. The USB flash drive was formatted using file system FAT32 and the initial configuration is stored in a file named init-cfg.txt. The firewall is currently running PAN-OS 10.0 and using a lab config. The contents of init-cgf.txt in the USB flash drive are as follows:
type=dhcp-client
Ip-address=
default-gateway=
netmask=
Ipv6-address=
Ipv6-default-gateway=
hostname=Ca-FW-DC1
panorama-server=10.5.107.20
panorama-server-2=10.5.107.21
tplname=FINANCE_TG4
dgname=finance_dg
dns-primary=10.5.6.6
dns-secondary=10.5.6.7
op-command-modes-multi-vsys.jumbo-frame
dhcp-send-hostname=yes
dhcp-send-client-id=yes
dhcp-accept-server-hostname=yes
dhcp-accept-server-domain=yes
The USB flash drive has been inserted in the firewalls’ USB port, and the firewall has been restarted using command> request restart system Upon restart, the firewall fails to begin the bootstrapping process. The failure is caused because:

The USB must be formatted using the exi3 file system, FAT32 is

Firewall must be in factory default state or have all private data deleted for bootstrapping

The bootstrap xml file is a required file, but it is missing

PAN-OS version must be 9.1 x at a minimum, but the firewall is running 10.0x

The hostname is a required parameter, but it is missing in init-cfg.txt

NEW QUESTION 21
Fix a node that shows as non-ready

Kubectl get nodes
// Check which node shows a not ready
kubectl describe nodes “node-name”
// Login to the node which shows as not ready and check the
process for kubelet, docker , kube-proxy.
// systemctl status kubelet (or) ps -aux | grep -i “processname”
// If the process is not started, then start using
systemctl start kubelet / docker
// Verify
ps -auxxww | grep -i “process-name”
kubectl get nodes

Kubectl get nodes
// Check which node shows a not ready
kubectl describe nodes “node-name”
// Login to the node which shows as not ready and check the
systemctl start kubelet / docker
// Verify
ps -auxxww | grep -i “process-name”
kubectl get nodes

NEW QUESTION 22
Get the pods with label env=dev and output the labels

NEW QUESTION 23
Remove taint added to node “worker-2”

NEW QUESTION 24
Score: 13%

Task
A Kubernetes worker node, named wk8s-node-0 is in state NotReady. Investigate why this is the case, and perform any appropriate steps to bring the node to a Ready state, ensuring that any changes are made permanent.

NEW QUESTION 25
Create a pod namedkucc8with asingle app container for each of the
following images running inside(there may be between 1 and 4images specified):
nginx + redis + memcached.

NEW QUESTION 26
Get IP address of the pod – “nginx-dev”

NEW QUESTION 27
Create a deployment as follows:
* Name: nginx-random
* Exposed via a service nginx-random
* Ensure that the service & pod are accessible via their respective DNS records
* The container(s) within any pod(s) running as a part of this deployment should use the nginx Image Next, use the utility nslookup to look up the DNS records of the service & pod and write the output to
/opt/KUNW00601/service.dns and /opt/KUNW00601/pod.dns respectively.

NEW QUESTION 28
Create an nginx pod with containerPort 80 and it should check the pod running at endpoint / healthz on port 80 and verify and delete the pod.

kubectl run nginx –image=nginx –restart=Always –port=80 —
dry-run -o yaml > nginx-pod.yaml
// add the livenessProbe section and create
apiVersion: v1
kind: Pod
metadata:
labels:
run: nginx
name: nginx
spec:
containers:
– image: nginx
name: nginx
ports:
– containerPort: 80
livenessProbe:
httpGet:
path: /healthz
port: 80
restartPolicy: Always
kubectl create -f nginx-pod.yaml
// verify
kubectl describe pod nginx | grep -i readiness
kubectl delete po nginx

kubectl run nginx –image=nginx –restart=Always –port=80 —
dry-run -o yaml > nginx-pod.yaml
// add the livenessProbe section and create
apiVersion: v1
kind: Pod
metadata:
labels:
containers:
– image: nginx
name: nginx
ports:
– containerPort: 60
livenessProbe:
httpGet:
path: /healthz
port: 60
restartPolicy: Always
kubectl create -f nginx-pod.yaml
// verify
kubectl describe pod nginx | grep -i readiness
kubectl delete po nginx

NEW QUESTION 29
Print pod name and start time to “/opt/pod-status” file

NEW QUESTION 30
Create a deployment as follows:
Name: nginx-random
Exposed via a service nginx-random
Ensure that the service & pod are accessible via their respective DNS records The container(s) within any pod(s) running as a part of this deployment should use the nginx Image Next, use the utility nslookup to look up the DNS records of the service & pod and write the output to /opt/KUNW00601/service.dns and /opt/KUNW00601/pod.dns respectively.

NEW QUESTION 31
Score: 4%

Task
Create a persistent volume with name app-data , of capacity 1Gi and access mode ReadOnlyMany. The type of volume is hostPath and its location is /srv/app-data .

NEW QUESTION 32
Create an nginx pod and list the pod with different levels of verbosity

NEW QUESTION 33
Scale the deployment webserver to

NEW QUESTION 34
Score:7%

Task
Create a new PersistentVolumeClaim
* Name: pv-volume
* Class: csi-hostpath-sc
* Capacity: 10Mi
Create a new Pod which mounts the PersistentVolumeClaim as a volume:
* Name: web-server
* Image: nginx
* Mount path: /usr/share/nginx/html
Configure the new Pod to have ReadWriteOnce
Finally, using kubectl edit or kubectl patch PersistentVolumeClaim to a capacity of 70Mi and record that change.

NEW QUESTION 35
Create a pod as follows:
* Name:mongo
* Using Image:mongo
* In anew Kubernetes namespacenamed:my-website

NEW QUESTION 36
Score: 7%

Task
First, create a snapshot of the existing etcd instance running at https://127.0.0.1:2379, saving the snapshot to /srv/data/etcd-snapshot.db.

Next, restore an existing, previous snapshot located at /var/lib/backup/etcd-snapshot-previo us.db

NEW QUESTION 37
Create a pod with image nginx called nginx and allow traffic on port 80

NEW QUESTION 38
For this item, you will have to ssh to the nodes ik8s-master-0 and ik8s-node-0 and complete all tasks on these nodes. Ensure that you return to the base node (hostname: node-1) when you have completed this item.
Context
As an administrator of a small development team, you have been asked to set up a Kubernetes cluster to test the viability of a new application.
Task
You must use kubeadm to perform this task. Any kubeadm invocations will require the use of the
–ignore-preflight-errors=all option.
* Configure the node ik8s-master-O as a master node. .
* Join the node ik8s-node-o to the cluster.

NEW QUESTION 39
Score: 4%

Task
Check to see how many nodes are ready (not including nodes tainted NoSchedule ) and write the number to
/opt/KUSC00402/kusc00402.txt

NEW QUESTION 40
List pod logs named “frontend” and search for the pattern “started” and write it to a file “/opt/error-logs”

Verified CKA dumps Q&As – 100% Pass from PrepAwayTest [Q18-Q40]

Leave a Reply Cancel reply