Passing HP HPE6-A75 Exam Using 2023 Practice Tests [Q35-Q52]

Rate this post

Passing HP HPE6-A75 Exam Using 2023 Practice Tests

HPE6-A75 Study Guide Brilliant HPE6-A75 Exam Dumps PDF

NO.35 The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?

The AP is configured to terminate on a non-cluster Mobility Controller.

The AP is configured as a RAP to terminate on a stand-alone controller.

The AP is configured as a RAP to terminate on a Mobility Master.

The AP is configured to terminate on a Mobility Controller in a cluster.

NO.36 Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
– A Mobility Master (MM) manages the cluster.
– The cluster contains two controllers: Cl and C2.
– API and AP2 use C1 as their Active AP Anchor Controller (A-AAC) with
C2 as their Standby AAC (S-AAC).
– AP3 and AP4 use C2 as their A-AAC, with C1 as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A- UAC) assigned is C1, with C2 as the standby. What happens when User1 roams the wireless network and eventually their session is handled by AP3?

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

NO.37 Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit. Which issue could cause this output?

The RADIUS shared secret does not match on the switch and the server.

The administrator entered the wrong password for the test account.

The switch does not have a certificate tor port-access installed on the switch.

The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.

NO.38 Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

The standby uses its own port in the link aggregation to forward the fabric.

The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

The standby uses the typical load sharing algorithm, and it might select either its port or the commander’s port.

The standby selects the port on the designated forwarder for the aggregation.

NO.39 Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user’s session will be terminated after 600 seconds.

NO.40 An administrator mistakenly configures the wrong VLAN setting on a managed controller’s interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

disaster recovery

auto-rollback

restore config

bulk configuration

NO.41 Refer to the exhibit.

Which statements accurately describe the status of the Onboarded devices in the configuration tor the network settings shown? (Select two.)

They will connect to Employee_Secure SSID after provisioning.

They will connect to Employee_Secure SSID for provisioning their devices.

They will use WPA2-PSK with AES when connecting to the SSID.

They will connect to secure_emp SSID after provisioning.

They will perform 802.1X authentication when connecting to the SSID.

NO.42 Refer to the exhibit. Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at
10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

NO.43 An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings send by the controller to prioritize traffic sent on interface 1

if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface

if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1

if interface connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value

NO.44 Refer to the exhibit.

An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?

ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user’s session after this time is up.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user’s session after 600 seconds.

ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user’s session will be terminated after 600 seconds.

NO.45 An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?

User role

Firewall policy

AAA policy

802.1X policy

NO.46 Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch.
The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit.
Which issue could cause this output?

The RADIUS shared secret does not match on the switch and the server.

The administrator entered the wrong password for the test account.

The switch does not have a certificate tor port-access installed on the switch.

The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.

NO.47 An AOS-Switch enforces 802.1X authentication to an Aruba ClearPass server. A user connects but cannot receive network access, even though the ClearPass administrator finds an Access- Accept for the user on this switch. The switch administrator suspects that there is an issue with the dynamic settings returned by ClearPass.
Where should the administrator look for information about these settings?

in the details for port-access clients

in the detailed RADIUS server statistics

in the interface statistics

in the running-config for the interface

NO.48 Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

NO.49 What are Operator Profiles used for?

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest

NO.50 An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster. What must the administrator do to solve this problem?

Enable CPSec in the MultiZone profile for both the primary and data zone.

Enable MultiZone booting in the MultiZone AP apboot configuration mode.

Add the MultiZone APs to the data zone’s CPSec whitelist.

Use different AP Group names for the two zones.

NO.51 A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs
Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?

VRRP provides redundancy against lost links but not a failed switch.

VRRP provides routing redundancy but not default gateway redundancy.

VRRP does not interoperate with MSTP.

VRRP takes longer than a second to fail over.

NO.52 Refer to the exhibit.

Based on the Enforcement Policy configuration, when a user with Role Engineer connects to the network and the posture token assigned is Unknown, which Enforcement Profile will be applied?

EMPLOYEE_VLAN

RestrictedACL

Deny Access Profile

HR VLAN

Remote Employee ACL

Passing the HP HPE6-A75 exam and obtaining the Aruba Certified Edge Professional certification is a significant achievement for IT professionals. It demonstrates their expertise in Aruba technologies and solutions and opens up many opportunities for career advancement. By preparing thoroughly for the exam, candidates can enhance their knowledge and skills in Aruba solutions and be better equipped to manage complex networks.

HP HPE6-A75 certification exam consists of 60 multiple-choice questions that must be completed within 90 minutes. HPE6-A75 exam is available in English, Japanese, Simplified Chinese, and Latin American Spanish. Candidates can take the exam at a Pearson VUE testing center or online from their home or office. Upon successful completion of the exam, candidates will receive the Aruba Certified Edge Professional certification, which is valid for three years.

Free HPE6-A75 Test Questions Real Practice Test Questions: https://www.prepawaytest.com/HP/HPE6-A75-practice-exam-dumps.html

Leave a Reply Cancel reply