HCSP Presales H19-424_V1.0 Dumps Updated Mar 16, 2024 - PrepAwayTest [Q55-Q69]

Rate this post

HCSP Presales H19-424_V1.0 Dumps | Updated Mar 16, 2024 – PrepAwayTest

Master 2024 Latest The Questions HCSP Presales and Pass H19-424_V1.0 Real Exam!

NO.55 Where can I modify the size and line thickness of the AP icon in the WLANPlanner tool ()

Resources have been planned

Global settings

Set the display items

Scene settings

NO.56 The statement about cloud AP radio tuning is incorrect

Global services such as local load tuning and load balancing of the LeaderAP are limited by the performance of the AP, and the specifications of the APs that can be managed by theLeaderAP are limited

If the specifications are exceeded, if APs are not grouped, APs will be randomly grouped, and adjacent APs and APs on the same floor may be assigned to different groups, which will affect global services such as tuning and load balancing

AP groups in the current version are grouped through AP management VLANs, and APs in the same group need to have the same management VLANs

The AP tuning group division will be reflected on the controller of the current version

NO.57 WLANR22 Spruce version, the description of the dual-machine hot standby feature is wrong ()

The HRP backup tunnel replaces the original V5HSB backup tunnel, supports multiple HRP tunnels, and the HRP multi-tunnel is redundant and highly reliable: supports configuration synchronization.

HRP supports fast switching to detect heartbeat vlanif down and achieve second-level switching.

HRP independently completes the active/standby state negotiation, and the HRP protocol forwarding plane is unloaded with high-priority protection to prevent the active/standby state oscillation in overload conditions.

Tunnel-level security encryption, support AES256 tunnel encryption, business data does not need to be encrypted by yourself.

NO.58 The following are not the characteristics of CloudCampus’s cloud management solution

Rapid deployment, which can support plug-and-play of tenant devices

Remote O&M can be achieved through the NETCONF protocol

In the solution, the NCE platform can provide API interfaces to connect with upper-layer applications

You cannot switch between the local management mode and the cloud management mode of Huawei devices

NO.59 The description of the main controller of the CloudEngine S8700 switch is incorrect.

04, 06, and 10 main control boards cannot be shared

The main controller does not provide a business port

The main control and switching are integrated, and the centralized architecture has a lower switching delay

1:1 primary/standby in the frame, primary/standby switchover and packet loss < 5ms

NO.60 In the SDN-WAN solution, the principles that need to be followed in the design of ISIS Cost are incorrectly described ()

The COST configuration of the MSTP link of the remote operator is larger, and it is recommended to configure 1000 to avoid traffic bypassing through the WAN link – the test is wrong

The COST configuration of the link of WDM or bare fiber in the same city is the second smallest, and it is recommended to configure 200 to ensure that the route calculation is secondary to the same city link

The COST value of the local link is the smallest, and it is recommended to configure 10 toensure that the route calculation gives priority to the local link test error

The link cost between the RR and the PE is extra-large, and it is recommended to set 10,000 to ensure that the RR device is only responsible for control plane route reflection and does not forward traffic

NO.61 The following scenarios in the CloudCampus solution do not belong to external network interconnection:

L3 shared exit

L3 exclusive export

Shared export

L2 exclusive export

NO.62 In the CloudCapmus solution, NETCONF/YANG does not support the management of Huawei devices

CloudEngine S series switches

CE series switches in data centers

WLAN AP

AR series routers

USG series firewalls

NO.63 The source of policy generation does not include ()

IGP

CLI/Netconf/yang

BGP

PCEP

NO.64 In the government unified construction mode of SDN-WAN solution, the SRv6 tunnel design description is incorrect ()

Service slices must use SRv6 Policy tunnels, which can be strictly explicit or loose.

The whole network uses NCE-P to calculate the path of the slice network based on the affinity attribute to ensure the optimal path of the whole network and make full use of the link bandwidth while ensuring the service quality.

SRv6Policy tunnels are vertically deployed between districts, counties, cities, and provincial WANs to optimize traffic to improve bandwidth utilization and ensure service quality.

SRO6fPolicy tunnels can be carried in the default slice network or in a non-default slice network. For default slices, SRv6BE is preferred. Services with special requirements can also be carried through SRv6 policy tunnels.

NO.65 IN QOS DESIGN, THE DESCRIPTION OF THE DESIGN PRINCIPLES OF TRAFFIC SCHEDULING IS INCORRECT ()

Maintain the principle of uniformity in the scheduling strategy of the whole network, and use templated deployment as much as possible to facilitate network management

LPQ/WFQ scheduling strategies can be used to avoid low-priority services not being able to obtain bandwidth resources

The current QoS policy needs to take into account the subsequent expansion of the network

Core services and video-voice services should ensure the absolute priority of forwarding and use PQ scheduling

Unless the business has special requirements, some parameters of the scheduling policy should be defaulted as much as possible

For TCP-based services, the queue must be configured with WRED dropping to avoid TCP global synchronization

NO.66 Configure the main interface of the translation tool, and some lines are marked with different background colors for the purpose of ()

The relocation is too boring, and the interface is too monotonous, purely for decoration and good looks

Remind users of the points that need special attention, such as: those that need to be manually confirmed and processed, and those that can be discarded

In order to export the configuration, the configuration does not have the background color everywhere when exporting the configuration

It has no practical effect

NO.67 In the southbound protocol of the controller, the () protocol is the LSP communication protocol between the NCE and the PCC, the PCC reports LSP status information to the NCE, and the NCE notifies the PCC to update the tunnel LSP.

PCEP

Netconf

BGP-LS

SNMP

NO.68 The maximum channel bandwidth supported by WIFI6 is:

80M

160M

320M

640M

NO.69 In the WLAN scenario, the following statements are wrong for demand collection ()

Coverage are answer confirm the key coverage area (such as office, conference room, etc.) and common coverage area (such as stairs, toilets, etc.) required by the customer

Pay the signal field strength requirements in the area, for example, -40dBm~-65dBm in key areas, and
>-75dBm in ordinary areas

Number of concurrent users: the total number of terminals connected in the current coverage area, and how many people in the coverage area are planned to be connected at the same time

Bandwidth requirements: the main types of services planned by the customer and the bandwidth requirements for each user

A fully updated 2024 H19-424_V1.0 Exam Dumps exam guide from training expert PrepAwayTest: https://www.prepawaytest.com/Huawei/H19-424_V1.0-practice-exam-dumps.html

HCSP Presales H19-424_V1.0 Dumps Updated Mar 16, 2024 – PrepAwayTest [Q55-Q69]

Leave a Reply Cancel reply