Check the Free demo of our 300-810 Exam Dumps with 280 Questions [Q89-Q113]

Rate this post

Check the Free demo of our 300-810 Exam Dumps with 280 Questions

Clear your concepts with 300-810 Questions Before Attempting Real exam

Cisco 300-810 exam is a challenging test that requires extensive knowledge and practical skills in implementing and troubleshooting Cisco collaboration applications. Earning the CCNP Collaboration certification demonstrates that an IT professional is equipped with the expertise and experience needed to design, deploy, and support Cisco collaboration solutions in enterprise environments.

NO.89 Refer to the exhibit.

A company integrated their newly deployed Cisco Jabber over Mobile and Remote Access with Cisco Unity Connection for voicemail access but users must manually enter their email credentials each time they log in to Cisco Jabber Which action resolves the issue?

Add Cisco UCM as an Authz Server on Unity Connection.

Add the Unity Connection Service Profile to the end users in Cisco UC Manager

Create a UC Service and Service Profile for Unity Connection

Add Unity Connection in the Expressway-C

NO.90 An engineer is informed that high availability for a Cisco IM and Presence server fails While the engineer examines the Cisco UCM presence redundancy group in the Ul. they discover that the first .. is in the Idle state, and the second node is in the running in backup mode state Which action must the engineer take to place both nodes back in the normal state?

Click Failover in the Server Action field

Restart the first node of the IM and Presence server

Click Fallback in the Server Action field

Reinstall the first node of the IM and Presence server.

NO.91 Refer to the exhibit. A company integrated their newly deployed Cisco Jabber over Mobile and Remote Access with Cisco Unity Connection for voicemail access, but users must manually enter their voicemail credentials each time they log in to Cisco Jabber. Which action resolves the issue?

Create a UC Service and Service Profile for Unity Connection.

Add Cisco UCM as an Authz Server on Unity Connection.

Add the Unity Connection Service Profile to the end users in Cisco UC Manager.

Add Unity Connection in the Expressway-C.

NO.92 Which two Cisco Unity Connection logs are used to troubleshoot issues with Message Waiting Indicators? (Choose two.)

Connection IMAP Server

Connection Mailbox Sync

Connection Notifier

Connection Message Transfer Agent

Connection Conversation Manager

NO.93 Refer to the exhibit.

Which end-user option can resolve this issue?

Standard CTI Reception of SRTP Key Material

Standard CTI Allow Calling Number Modification

Standard CTI Allow Control of Phones Supporting Rollover Mode

Standard CTI Allow Call Monitoring

NO.94

Refer to the exhibit. An administrator troubleshoots push notifications, and Cisco TAC requests the trace files from the cluster. From which location should the files be collected?

Option A

Option B

Option C

Option D

NO.95

Refer to the exhibit. A Cisco Jabber for windows users Is reporting an Issue with phone control. Which action will resolve this issue?

Change the privacy setting on the CSF device to “Off”.

Uncheck “logged into hunt group” on the user’s CSF device.

Create a device profile for the phone.

Add the standard CCM end users and standard CTl enabled permission groups for the user.

NO.96 Refer to the exhibit. A collaboration engineer is troubleshooting Cisco Jabber for Windows login issues for clients on a corporate network with an on-premises Cisco IM and Presence server.
This issue is impacting all users. Which action resolves the issue?

Add the host “imp-pub” to the proxy exceptions list on the users’ Windows computers.

Restore network connectivity to host “imp-pub”.

Restart the IM and Presence services on the host “imp-pub”.

Change the DNS SRV record to point to the Cisco UCM node instead of the IM and Presence node.

NO.97 A collaboration engineer configured high availability for Cisco IM and Presence service The engineer wants to ensure that client failovers do not disrupt other users on the secondary node What must the engineer configure to accomplish this goal?

“Maximum Requests Per Child” on the SIP Proxy service

“Maximum database requests to allow” on the XCP Router service

“EWS Status Frequency” on the Presence Engine service

“CUPC 8.5 And Higher – Re-Login Limits” on the Server Recovery Manager service

NO.98 An engineer must configure XMPP federation on a Cisco Instant Messaging and Presence Service node, but the XCP XMPP Federation Connection Manager service fails to start. Which action must the engineer take to resolve the issue?

Activate XMPP federation service

Enable TLS m the XMPP Federation settings.

Restart the Cisco XCP Router service

Restart the Cisco IM and Presence service.

NO.99 In the integration of Cisco Unity Connection using SIP, which SIP trunk security profile option is required for MWI to work correctly?

Accept out-of-dialog refer

Accept replaces header

Accept unsolicited notification

Accept presence subscription

NO.100 Refer to the exhibit.

A customer reports that after a network failure, all of the Cisco Jabber clients are not switched back to their home nodes. An engineer determines that the primary Cisco IM and Presence server is in Failed Over state.
Which two actions should be performed to bring the system back to operational state and to prevent future occurrences? (Choose two.)

Advise all users to re-login to their Jabber clients.

Confirm that both IM and Presence servers are configured in the Presence Redundancy Group configuration pane.

Perform a restart of the IM and Presence primary server to force fallback.

Click the Fallback button in the Server Action pane.

Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.

NO.101 A collaboration engineer troubleshoots an Issue with Cisco IM and Presence federated with Microsoft Skype for Business. A Cisco Jabber user reports being unable to see the presence status of a user on Microsoft Skype for Business when searching for the Microsoft user.
Which action resolves this issue?

Disable TLS for the federation.

Configure the federation to use the XMPP protocol.

Add a static route on Cisco IM and Presence to the Skype for Business domain.

Have the Jabber user add the Skype for Business user to the Jabber contact list.

NO.102 After integrating Cisco Unity Express with Cisco Unified Communications Manager Express, users report that the system does not respond to their digit presses. Which two configuration snippets resolve this issue?
(Choose two.)

dial-peer voice 6800 voip destination-pattern 5… session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-kpml codec g729r8

dial-peer voice 6800 voip destination-pattern 5… session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-notify codec g711ulaw

dial-peer voice 6800 voip destination-pattern 5… session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay rtp-nte codec g711ulaw

dial-peer voice 6800 voip destination-pattern 5… session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-kpml codec g711ulaw

dial-peer voice 6800 voip destination-pattern 5… session protocol sipv2 session target ipv4:10.3.6.127 dtmf-relay sip-notify codec g729r8

NO.103 What are two authentication mechanisms for identity provider authentication? (Choose two.)

UID

PKI/CAC

ACS

password only

Kerberos

NO.104 An administrator needs to prevent toll fraud on Cisco unity connection. Which action should be taken to accomplish this task?

modify the class of restriction

set up class of restriction in the Cisco IOS Voice Gateway

set up all restriction tables to prevent calls to the operator

assign a CSS that does not have calling rights to the caller extension.

NO.105 Refer to the exhibit.

Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.

Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.

These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.

The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.

NO.106 An engineer deploys Centralized Deployment for Cisco IM and Presence, where central IM and Presence runs version 12.0, and remote Cisco UCM clusters run version 10.5. The engineer checks under System > Centralized Deployment and notes that Status remains UnSynchronized. What are two reasons for this status?
(Choose two.)

The Cisco UCM and IM and Presence cluster must be running at least version 11.5 to allow for Centralized Deployment.

The remote Cisco UCM cluster does not support OAuth Refresh Token flow.

This connection must be synchronized from the remote Cisco UCM Administration menu.

The username ana/or password of the application user that was provided for adding remote dusters to the central IM and Presence is incorrect.

The application user that is configured on remote Cisco UCM clusters does not have ‘Standard AXL API Access- added.

NO.107 An engineer needs to configure calendar integration between Microsoft Exchange and a Cisco IM and Presence server The engineer created the resource mailboxes and now needs to add impersonation Which command accomplishes this task using the Exchange Management Shell from Microsoft Exchange?

Option A

Option B

Option C

Option D

NO.108 An engineer must verify that the DNS SRV entries that are configured have the correct information.
How is this configuration completed via a Windows machine?

Go to Windows Explorer and type nslookup. Set the type=internet, and then enter the SRV record.

Go to the command prompt and type dnslookup. Set the type=sip. and then enter the SRV record.

Go to Internet Explorer and type nslookup. Set the type=srv, and then enter the SRV record.

Go to the command prompt and type nslookup. Set the type=srv, and then enter the SRV record.

NO.109 Refer to the exhibit. The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting.
Which action should be taken to correct this issue?

Modify the rule to a Forward Routing Rule.

Modify the Calling Number to 3005.

Modify the Dialed Number condition from “Equals” to “In”.

Modify the Call Forward All to the voicemail pilot.

NO.110 Refer to the exhibit.

Which two steps resolve the “Users with Duplicate User IDs” message? (Choose two.)

Rename the directory URI value for one of the users to ensure that there is no duplication.

Rename the User ID value for one user if different users on different clusters have the same User ID assigned.

Unassign a user from one of the clusters when the same user is assigned to two different clusters.

Assign the duplicate user to the secondary Cisco IM and Presence node.

Delete the user ID for the duplicate user ID.

NO.111 Refer to the exhibit.

The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting. Which action should be taken to correct this issue?

Modify the rule to a Forward Routing Rule.

Modify the Calling Number to 3005.

Modify the Dialed Number condition from “Equals” to “In”.

Modify the Call Forward All to the voicemail pilot.

NO.112

Refer to the exhibit. An engineer is troubleshooting an issue with Cisco Jabber for Windows The end-user reports that Cisco Jabber cannot be used to control a Cisco 8841 IP Phone The phone appears in the Jabber client, but there is a red x on the icon for the phone Which end-user option resolves the issue?

Standard CTI Allow Reception of SRTP Key Material

Standard CTI Allow Calling Number Modification

Standard CTI Allow Call Monitoring

Standard CTI Allow Control of Phones Supporting Rollover Mode

NO.113 Refer to the exhibit.

After configuration of the Cisco IM&P cluster in high-availability mode, both IM&P servers remain in the initializing state. Which two actions ensure normal operations of this IM&P high-availability cluster? (Choose two.)

Clear the Enable High Availability check box in the Presence Redundancy Group configuration.

Confirm that Cisco Presence Engine, Cisco XCP Router, and Cisco DB services are up and running on both IM&P servers.

Restart the Server Recovery Manager service in Cisco Unified Serviceability – Network Services on both IM&P servers.

Verify that the Cisco XCP SIP Federation Connection Manager service is running.

Ensure that an equal number of users are assigned to each IM&P server.

Cisco 300-810 exam consists of 60-70 questions, and the candidate is given 90 minutes to complete the exam. The questions are designed to test the candidate’s understanding of collaboration applications, including their installation, configuration, and troubleshooting. 300-810 exam measures the candidate’s ability to work with the Cisco Unified Communications Manager, Unity Connection, and Webex Teams. 300-810 exam also evaluates the candidate’s knowledge of Cisco Expressway, Cisco Webex Edge services, and Cisco Meeting Server.

Get professional help from our 300-810 Dumps PDF: https://www.prepawaytest.com/Cisco/300-810-practice-exam-dumps.html

Leave a Reply Cancel reply