Verified 5V0-42.21 Dumps Q&As - 5V0-42.21 Test Engine with Correct Answers [Q30-Q44]

Rate this post

Verified 5V0-42.21 Dumps Q&As – 5V0-42.21 Test Engine with Correct Answers

Pass Your 5V0-42.21 Dumps as PDF Updated on 2023 With 53 Questions

The VMware 5V0-42.21 exam covers a wide range of topics related to VMware SD-WAN, including design principles, deployment models, network security, traffic management, and troubleshooting. The exam consists of 60 multiple-choice questions, and candidates are given 105 minutes to complete the exam. The passing score for the exam is 300 out of 500, and candidates must demonstrate a thorough understanding of VMware SD-WAN technology and its various components.

QUESTION 30
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?

Regional Gateway

Super Gateway

Primary Gateway

Alternate Gateway

QUESTION 31
Refer to the exhibit.

Which VMware SD-WAN Edge High Availability deployment is being used”?

Enhanced HA

Fault Domain HA

VRRP HA

Standard HA

QUESTION 32
Which VMware SR-WAN component runs the Deep Application Recognition Engine?

VMware SD WAN Orchestrator

VMware SD-WAN Controller

VMware SD-WAN Gateway

VMware SD-WAN Edge

QUESTION 33
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.

Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.

Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community

Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.

Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.

QUESTION 34
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?

Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward

Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings

Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings

Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings

QUESTION 35
A customer would like to use a VNF firewall on the VMware SU-WAN 600 series Edge.
Where do the Edge firewallrules of the VNF apply?

Underlay

Overlay

WAN side

LAN side

QUESTION 36
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?

The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.

Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.

Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.

VMware SD-WAN will use SSL inspection to detect Office 365.

QUESTION 37
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.

Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet

Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet

Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet

Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet

QUESTION 38
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?

adnim

No password required

Password configured in cloud_init

velocloud

QUESTION 39
Employees with an Apple iOS device have been causing congestion on the company’s internet What should an administrator configure to target these devices when creating a Business policy for this issue?

Action Priority

Action Network Service

Match Source

Match Destination

QUESTION 40
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?

None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)

None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)

None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)

None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)

QUESTION 41
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?

One VCE cluster can be formed with both virtual and hardware at the same lime

A VCE cluster requires one dedicated interface for HA sync

VCF clusters member sync flow tables between themselves.

VCE cluster members should have unique IP addresses on its WAN interfaces

QUESTION 42
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.

A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway

It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.

When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge.

The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default.

QUESTION 43
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?

Define multiple segments tor each customer

Enable NAT hand off under hand off static routes configuration

Enable tag type QinQ under hand off interface configuration

Configure source policy-based NAT under business- policies configuration

QUESTION 44
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?

Hosted SD-WAN Orchestrator/Controller

On-premises SD-WAN Orchestrator/Controller

Partially on-premises

All on-premises

Loading …

Pass VMware 5V0-42.21 Exam Info and Free Practice Test: https://www.prepawaytest.com/VMware/5V0-42.21-practice-exam-dumps.html

Verified 5V0-42.21 Dumps Q&As – 5V0-42.21 Test Engine with Correct Answers [Q30-Q44]

Leave a Reply Cancel reply