[2023] Get Top-Rated Huawei H35-480_V3.0 Exam Dumps Now [Q19-Q35]

NO.19 Which of the following MML commands can be used to query version information relating to the software stored on the gNodeB?

NO.20 Which of the following parameters is related to the frequency-domain position of PBCH DMRSs?

NO.21 What is the required distance between a CPE and a gNodeB in a 5G network test?

NO.22 What is the maximum number of PCIs supported by a 5G network?

NO.23 In the inter-site DC solution, the X2 interface can be used to implement transmission interconnection between the LTE and NR sites. Which of the following is the requirement of the transmission delay in such case?

NO.24 Which of the following can be used to check whether an antenna is reversely connected during NR single site verification?

NO.25 At which layer is downlink data split implemented over the NR air interface in the NSA Option 3x architecture?

NO.26 Which of the following is the recommended sequence for configuring data during gNodeB commissioning?

NO.27 After the cell search is complete, a 5G UE automatically selects a PLMN based on the priority sequence. Which PLMN will the UE preferentially select for registration?

NO.28 Which of the following functions are implemented by the UBBP board in the BBU5900? (Choose all that Apply)

NO.29 Which type of information about NR cells is carried in the neighboring NR cell MRs reported by UEs?

NO.30 Which of the following factors trigger measurement in connected mode in SA networking? (Choose All that Apply)

NO.31 In what scenarios is GENEX Assistant typically applied?

NO.32 If the length of the CPRI optical fiber between a BBU and an RRU exceeds 150 m, you are advised to use a multimode fiber.

NO.33 Which of the following MML commands can be used to query version information relating to the software stored on the gNodeB?

NO.34 Which of the following NR channels or signals supports static and dynamic power control?

NO.35 Which of the following files must be prepared when remotely commissioning a gNodeB using the MAE Deployment?