Pass JN0-636 Exam with Updated JN0-636 Exam Dumps PDF 2023 [Q63-Q83]

Rate this post

Pass JN0-636 Exam with Updated JN0-636 Exam Dumps PDF 2023

JN0-636 Exam Dumps – Free Demo & 365 Day Updates

Certification in JNCIP-SEC is highly valuable for network security professionals as it confirms their knowledge and expertise in deploying Juniper Networks security technologies in complex network environments. It opens doors for exciting career opportunities and helps professionals advance in their careers. Additionally, holding this certification provides professionals with a sense of accomplishment and recognition for their expertise in network security.

QUESTION 63
Exhibit

You are implementing filter-based forwarding to send traffic from the 172.25.0.0/24 network through ISP-1 while sending all other traffic through your connection to ISP-2. Your ge-0/0/1 interface connects to two networks, including the 172.25.0.0/24 network. You have implemented the configuration shown in the exhibit.
The traffic from the 172.25.0.0/24 network is being forwarded as expected to 172.20.0.2, however traffic from the other network (172.25.1.0/24) is not being forwarded to the upstream 172.21.0.2 neighbor.
In this scenario, which action will solve this problem?

You must specify that the 172.25.1.1/24 IP address is the primary address on the ge-0/0/1 interface.

You must apply the firewall filter to the lo0 interface when using filter-based forwarding.

You must add another term to the firewall filter to accept the traffic from the 172.25.1.0/24 network.

You must create the static default route to neighbor 172.21 0.2 under the ISP-1 routing instance hierarchy.

QUESTION 64
Which Junos security feature is used for signature-based attack prevention?

RADIUS

AppQoS

IPS

PIM

QUESTION 65
A local user complains that they cannot connect to an FTP server on the DMZ network.
You investigate and confirm that the security policy allows FTP traffic from the trust zone to the DMZ zone.
What are two reasons for this problem? (Choose two.)

The FTP server has no route back to the local network.

No route is configured to the DMZ network.

No security policy exists for traffic from the DMZ zone to the trust zone.

The FTP ALG is disabled.

QUESTION 66
Your company recently acquired a competitor. You want to use using the same IPv4 address space as your company.
Referring to the exhibit, which two actions solve this problem? (Choose two)

Configure static NAT on the SRX Series devices.

Connect the competitor network using IPsec policy-based VPNs.

Identify two neutral IPv4 address spaces for address translation.

Configure IPsec Transport mode.

QUESTION 67
Click the Exhibit button.

You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?

Apply the filter as an input filter on interface xe-0/2/1.0

Create a routing instance named default

Apply the filter as an input filter on interface xe-0/0/1.0

Apply the filter as an output filter on interface xe-0/1/0.0

QUESTION 68
Exhibit

The exhibit shows a snippet of a security flow trace.
In this scenario, which two statements are correct? (Choose two.)

This packet arrived on interface ge-0/0/4.0.

Destination NAT occurs.

The capture is a packet from the source address 172.20.101.10 destined to 10.0.1.129.

An existing session is found in the table.

QUESTION 69
You issue the command shown in the exhibit.
Which policy will be active for the identified traffic?

Policy p4

Policy p7

Policy p1

Policy p12

QUESTION 70
Referring to the exhibit. You configure a traceoptions file called radius on your returns the output shown in the exhibit. What is the source of the problem?

An incorrect password is being used.

The authentication order is misconfigured.

The RADIUS server IP address is unreachable.

The RADIUS server suffered a hardware failure.

QUESTION 71
Click the Exhibit button.

While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?

Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use

Verify that the connectivity association key and the connectivity association key name match on both devices

Verify that the transmission path is not replicating packets or correcting frame check sequence error packets

Verify that the interface between the two devices is up and not experiencing errors

QUESTION 72
You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1. You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem?

Add multipoint to the st0.0 interface configuration on the branch1 device.

Change the IKE proposal-set to compatible on the branch1 and corporate devices.

Change the local identity to inet advpn on the branch1 device.

Change the IKE mode to aggressive on the branch1 and corporate devices.

QUESTION 73
The monitor traffic interface command is being used to capture the packets destined to and the from the SRX Series device.
In this scenario, which two statements related to the feature are true? (Choose two.)

This feature does not capture transit traffic.

This feature captures ICMP traffic to and from the SRX Series device.

This feature is supported on high-end SRX Series devices only.

This feature is supported on both branch and high-end SRX Series devices.

QUESTION 74
You must implement an IPsec VPN on an SRX Series device using PKI certificates for authentication. As part of the implementation, you are required to ensure that the certificate submission, renewal, and retrieval processes are handled automatically from the certificate authority.
In this scenario, which statement is correct.

You can use CRL to accomplish this behavior.

You can use SCEP to accomplish this behavior.

You can use OCSP to accomplish this behavior.

You can use SPKI to accomplish this behavior.

QUESTION 75
Which two types of source NAT translations are supported in this scenario? (Choose two.)

translation of IPv4 hosts to IPv6 hosts with or without port address translation

translation of one IPv4 subnet to one IPv6 subnet with port address translation

translation of one IPv6 subnet to another IPv6 subnet without port address translation

translation of one IPv6 subnet to another IPv6 subnet with port address translation

QUESTION 76
Which two log format types are supported by the JATP appliance? (Choose two.)

YAML

XML

CSV

YANG

QUESTION 77
Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The 3uspicious_Endpoint3 feed is only usable by the SRX-1 device.

You must manually create the suspicious_Endpoint3 feed in the Juniper ATP Cloud interface.

The 3uspiciou3_Endpoint3 feed is usable by any SRX Series device that is a part of the same realm as SRX-1

Juniper ATP Cloud automatically creates the 3uopi’cioua_Endpoints feed after you commit the security policy.

QUESTION 78
Referring to the exhibit, which two statements are true? (Choose two.)

The data that traverses the ge-0/070 interface is secured by a secure association key.

The data that traverses the ge-070/0 interface can be intercepted and read by anyone.

The data that traverses the ge-070/0 interface cannot be intercepted and read by anyone.

The data that traverses the ge-O/0/0 interface is secured by a connectivity association key.

QUESTION 79
You are asked to configure a security policy on the SRX Series device. After committing the policy, you receive the “Policy is out of sync between RE and PFE <SPU-name(s)>.” error.
Which command would be used to solve the problem?

request security polices resync

request service-deployment

request security polices check

restart security-intelligence

QUESTION 80
You must ensure that your Layer 2 traffic is secured on your SRX Series device in transparent mode.
What must be considered when accomplishing this task?

Layer 2 interfaces must use theethernet-switchingprotocol family.

Security policies are not supported when operating in transparent mode.

Screens are not supported in your security zones with transparent mode.

You must reboot your device after configuring transparent mode.

QUESTION 81
Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device?
(Choose two.)
A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 82
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

Data is transmitted across the link in plaintext

The link is not protected against man-in-the-middle attacks

The link is protected against man-in-the-middle attacks

Data is transmitted across the link in cyphertext

QUESTION 83
You are using destination NAT to translate the address of your HTTPS server to a private address on your SRX Series device. You have decided to implement IDP SSL decryption.
Upon enabling the decryption, you notice sessions are not decrypted.
Which action resolves the problem?

Replace the server SSL certificate to use the public address.

Reboot the SRX Series device.

Increase the SSLsession-id-cache-timeoutvalue to any value greater than 5000 seconds.

Enable the IDPsensor-configurationdetector to detect address translation.

Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is an industry-standard certification that demonstrates a candidate’s proficiency in designing and implementing advanced network security solutions using Juniper Networks technologies. It is a valuable certification for network security professionals looking to advance their careers and stay up-to-date with the latest security technologies and best practices.

JN0-636 Dumps – Pass Your Certification Exam: https://www.prepawaytest.com/Juniper/JN0-636-practice-exam-dumps.html

Leave a Reply Cancel reply