NSE7_LED-7.0 Questions Prepare with Learning Information! 2024 Regularly updated [Q20-Q43]

Rate this post

NSE7_LED-7.0 Questions Prepare with Learning Information! 2024 Regularly updated

Get NSE7_LED-7.0 Products Practice Material for NSE7_LED-7.0 Exam Question Preparation

Fortinet NSE7_LED-7.0, also known as the Fortinet NSE 7 – LAN Edge 7.0 exam, is a certification that validates an individual’s knowledge and skills in securing LAN edge devices such as switches, routers, and access points. NSE7_LED-7.0 exam covers topics such as VLANs, DHCP, NAT, VPN, Firewall policies, and more. Fortinet NSE 7 – LAN Edge 7.0 certification is essential for network administrators and security professionals who want to ensure the security of their organization’s LAN edge network infrastructure.

QUESTION 20
You are investigating a report of poor wireless performance in a network that you manage. The issue is related to an AP interface in the 5 GHz range You are monitoring the channel utilization over time.
What is the recommended maximum utilization value that an interface should not exceed?

85%

95%

75%

65%

QUESTION 21
Refer to the exhibit

Examine the FortiGate RSSO configuration shown in the exhibit
FortiGate is configured to receive RADIUS accounting messages on port3 to authenticate RSSO users The users are located behind port3 and the internet link is connected to port1 FortiGate is processing incoming RADIUS accounting messages successfully and RSSO users are getting associated with the RSSO Group user group However all the users are able to access the internet, and the administrator wants to restrict internet access to RSSO users only Which configuration change should the administrator make to fix the problem?

Change the RADIUS Attribute Value selling to match the name of the RADIUS attribute containing the group membership information of the RSSO users

Add RSSO Group to the firewall policy

Enable Security Fabric Connection on port3

Create a second firewall policy from port3 lo port1 and select the target destination subnets

QUESTION 22
Refer to the exhibits

The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?

In the SSIDs section enable Tunnel

Enable one channel in the Channels section

Enable multiple channels in the Channels section and enable Radio Resource Provision

In the SSIDs section enable Manual and assign the networks manually

QUESTION 23
Which FortiSwitch VLANs are automatically created on FortGate when the first FortiSwitch device is discovered1?

default quarantine, rspan voice video onboarding and nac_segment

access, quarantine, rspan. voice, video, and onboarding

default quarantine rspan voice video and nac_segment

fortilink. quarantine erspan voice video and onboarding

QUESTION 24
A wireless network in a school provides guest access using a captive portal to allow unregistered users to self-register and access the network The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS) Which two changes must the administrator make to enforce HTTPS authentication”? (Choose two >

Create a new SSID with the HTTPS captive portal URL

Enable HTTP redirect in the user authentication settings

Disable HTTP administrative access on the guest SSID to enforce HTTPS connection

Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator

QUESTION 25
Refer to the exhibit.

Examine the FortiManager configuration and FortiGate CLI output shown in the exhibit An administrator is testing the NAC feature The test device is connected to a managed FortiSwitch device
{S224EPTF19″53C7)onpOrt2
After applying the NAC policy on port2 and generating traffic on the test device the test device is not matching the NAC policy therefore the test device remains m the onboarding VLAN Based on the information shown in the exhibit which two scenarios are likely to cause this issue? (Choose two.)

Management communication between FortiGate and FortiSwitch is down

The MAC address configured on the NAC policy is incorrect

The device operating system detected by FortiGate is not Linux

Device detection is not enabled on VLAN 4089

QUESTION 26
Refer to the exhibit.

Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?

FortiSwitch cannot authenticate multiple devices connected to the same port

FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password

FortiSwitch will assign non-802 1X devices to the onboarding VLAN

All EAP messages will be terminated on FortiSwitch

QUESTION 27
Which two statements about the guest portal on FortiAuthenticator are true? (Choose two.)

Each remote user on FortiAuthenticator can sponsor up to 10 guest accounts

Administrators must approve all guest accounts before they can be used

The guest portal provides pre and post-log in services

Administrators can use one or more incoming parameters to configure a mapping rule for the guest portal

QUESTION 28
Which CLI command should an administrator use to view the certificate verification process in real time?

diagnose debug application authd -1

diagnose debug application foauthd -1

diagnose debug application radiusd -1

diagnose debug application fnbamd -1

QUESTION 29
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?

The FortiSwitch MAC address table is missing entries

The native VLAN configured on the ports is incorrect

The FortiGate ARP table is missing entries

Access VLAN is enabled on the VLAN

QUESTION 30
Refer to the exhibit.

By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?

To ignore DHCP requests coming from FortiSwitch and FortiExtender devices

To reserve IP addresses for FortiSwitch and FortiExtender devices

To restrict the IP address assignment to FortiSwitch and FortiExtender devices

To restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname

QUESTION 31

Wireless guest users are unable to authenticate because they are getting a certificate error while loading the captive portal login page.This URL string is the HTTPS POST URL guest wireless users see when attempting to access the network using the web browser

Which two settings are the likely causes of the issue? (Choose two.)

The external server FQDN is incorrect

The wireless user’s browser is missing a CA certificate

The FortiGate authentication interface address is using HTTPS

The user address is not in DDNS form

QUESTION 32
Refer to the exhibit.

Examine the debug output shown in the exhibit
Which two statements about the RADIUS debug output are true” (Choose two)

The user student belongs to the SSLVPN group

User authentication failed

The RADIUS server sent a vendor-specific attribute in the RADIUS response

User authentication succeeded using MSCHAP

QUESTION 33
Which EAP method requires the use of a digital certificate on both the server end and the client end?

EAP-TTLS

PEAP

EAP-GTC

EAP-TLS

QUESTION 34
When you configure a FortiAP wireless interface for auto TX power control which statement describes how it configures its transmission power”?

Every 30 seconds the AP will measure the signal strength of the AP using the client The AP will adjust its signal strength up or down until the AP signal is detected at -70 dBm

Every 30 seconds FortiGate measures the signal strength of adjacent AP interfaces It will adjust its own AP power to match the adjacent AP signal strength

Every 30 seconds FortiGate measures the signal strength of adjacent FortiAP interfaces It will adjust the adjacent AP power to be detectable at -70 dBm

Every 30 seconds FortiGate measures the signal strength of the weakest associated client The AP will then configure its radio power to match the detected signal strength of the client

QUESTION 35
Refer to the exhibit.

Examine the FortiManager information shown in the exhibit
Which two statements about the FortiManager status are true” (Choose two)