Ultimate Guide to the 201 - Latest Oct 30, 2024 Edition Available Now [Q144-Q163]

Rate this post

Ultimate Guide to the 201 – Latest Oct 30, 2024 Edition Available Now

2024 Updated Verified Pass 201 Exam – Real Questions and Answers

Difficulty in Attempting F5-201: TMOS Administration Exam

If the user has successfully passed the F5-201 practice exam and has been through F5-201 exam dumps then the certification exam will not be too much difficult as the user has shown aptitude for understanding complicated processes.

Q144. A standard virtual server is defined with a pool and a SNAT using automap. All other settings for the virtual server are at defaults. When client traffic is processed by the BIG-IP, what will occur to the IP addresses?

Traffic initiated by the pool members will have the source address translated to a self-IP address but the destination address will not be changed.

Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address.

Traffic initiated by selected clients, based on their IP address, will have the source address translated to a self-IP address but the destination will only be translated if the traffic is destined to the virtual server.

Traffic initiated to the virtual server will have the destination address translated to a pool member address and the source address translated to a self-IP address. Traffic arriving destined to other destinations will have the source translated to a self-IP address only.

Q145. How is MAC masquerading configured?

Specify the desired MAC address for each VLAN for which you want this feature enabled.

Specify the desired MAC address for each selfIP address for which you want this feature enabled.

Specify the desired MAC address for each VLAN on the active system and synchronize the systems.

Specify the desired MAC address for each floating selfIP address for which you want this feature enabled.

Q146. A site wishes to perform source address translation on packets arriving from the Internet for clients using some pools but not others. The determination is not based on the client’s IP address, but on the pool they are load balanced to. What could best accomplish this goal.

A SNAT for all addresses could
be defined,
and then disable the SNAT processing for select pools.

The decision to perform source address translation is always based on VLAN. Thus, the goal cannot be achieved.

For each virtual server, regardless their default load balancing pools, association with SNAT pools could vary dependent upon need.

The decision to perform source address translation is always based on a client’s address (or network). Thus, this goal cannot be achieved.

Q147. What is required for a virtual server to support clients whose traffic arrives on the internal VLAN and pool members whose traffic arrives on the external VLAN?

That support is never available.

The virtual server must be enabled for both VLANs.

The virtual server must be enabled on the internal VLAN.

The virtual server must be enabled on the external VLAN.

Q148. You have a pool of servers that need to be tested. All of the servers but one should be tested every 10 seconds, but one is slower and should only be tested every 20 seconds. How do you proceed.

It cannot be done. All monitors test every five seconds.

It can be done, but will require assigning monitors to each pool member.

It cannot be done. All of the members of a pool must be tested at the same frequency.

It can be done by assigning one monitor to the pool and a different monitor to the slower pool member.

Q149. A site needs a virtual server that will use an iRule to parse HTTPS traffic based on HTTP header values. Which two profile types must be associated with such a virtual server. (Choose two.)

TCP

HTTP

HTTPS

ServerSSL

Q150. The BIG-IP Administrator creates a custom iRule that fails to work as expected. Which F5 online resource should the administrator use to help resolve this issue?

DevCentral

Bug Tracker

University

Health

Q151. When initially configuring the BIGElIP system using the config utility, which two parameters can be set. (Choose two.)

the netmask of the SCCP

the IP address of the SCCP

the port lockdown settings for the SCCP

the netmask of the host via the management port

the IP address of the host via the management port

the port lockdown settings for the host via the management port

Q152. A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license.
Which steps should the BIG-IP Administrator?

System License > Re-activate> Add-On Registration> Edit

System > License > Re-activate > Base Registration> Edit

Device Management > Devices > Select BIG-IP System > Update

System > Configuration >Device > General

Q153. Which statement accurately describes the difference between two loadElbalancing modes specified as “member” and “node”.

There is no difference; the two terms are referenced for backward compatibility purposes.

When the loadElbalancing choice references “node”, priority group activation is unavailable.

LoadElbalancing options referencing “nodes” are available only when the pool members are defined for the “any” port.

When the loadElb alancing choice references “node”, the addresses’ parameters are used to make the loadElbalancing choice rather than the member’s parameters.

Q154. A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521.
Where should the BIG-IP Administrator apply this monitor?

Local Traffic > Profiles > Protocol > TCP

Local Traffic > Nodes > Default Monitor

Local Traffic > Pools > De Pool > Members

Local Traffic > Pools > DB Pool > Properties

Q155. A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.
A ping works to the pool member address.
The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/Connection Close/r/n/r/n Which CLI tool syntax will show that the web server returns the correct HTTP response?

curlhttp://10.10.10.3.75:8080/www.example.com/index.html

curl-header ‘Host:www.example.com’
http://10.10.3.75:8080/

tracepath ‘http://www.example.com:80

tracepath 10.10.3.75:8080 GET /index

Q156. Which parameters are set to the same value when a pair of BIG-IP devices are synchronized?

host names

system clocks

profile definitions

VLAN failsafe settings

MAC masquerade addresses

Q157. Where is persistence mirroring configured.

It is always enabled.

It is part of a pool definition.

It is part of a profile definition.

It is part of a virtual server definition.

Q158. What is the purpose of floating selfElIP addresses?

to define an address that grants administrative access to either system at any time

to define an address that allows either system to initiate communication at any time

to define an address that allows network devices to route traffic via a single IP address

to define an address that gives network devices greater flexibility in choosing a path to forward traffic

Q159. Assume a virtual
server
has a ServerSSL
profile.
What
SSL certificates are required on the pool members.

No SSL certificates are required on the pool members.

The pool members.SSL certificates must only exist.

The pool members.SSL certificates must be issued from a certificate authority.

The pool members.SSL certificates must be created within the company hosting the BIGElIPs.

Q160. Which type of Virtual Server requires the use of a FastL4 profile?

Performance (Layer 4)

Stateless

Performance (HTTP)

Standard

Q161. A site needs to terminate client HTTPS traffic at the BEl II GP and forward that traffic unencrypted. Which two are profile types that must be associated with such a virtual server. (Choose two.)

TCP

HTTP

HTTPS

ClientSSL

ServerSSL

Q162. A BIG-IP Administrator is unable to connect to the management interface via HTTPS. What is a possible reason for this issue?

The port lockdown setting is configured to Allow None.

An incorrect management route is specified.

The IP address of the device used to access the management interface is NOT included in the “P Allow” list in the Configuration Utility.

The IP address of the device used to access the management interface is NOT included in the “httpd Allow” list in the CLI.

Q163. Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

The SNAT must be enabled for all VLANs.

The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.

The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.

The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.

Loading …

F5 201 (BIG-IP Administrator) Certification Exam is designed for IT professionals who are responsible for managing, configuring, and maintaining F5’s BIG-IP Local Traffic Manager (LTM) products. BIG-IP Administrator Exam certification exam measures the candidates’ understanding of the BIG-IP system, including its architecture, configuration, and management.

Dumps Moneyack Guarantee – 201 Dumps Approved Dumps: https://www.prepawaytest.com/F5/201-practice-exam-dumps.html

Ultimate Guide to the 201 – Latest Oct 30, 2024 Edition Available Now [Q144-Q163]

Difficulty in Attempting F5-201: TMOS Administration Exam

Leave a Reply Cancel reply