Pass Exam With Full Sureness – D-VXB-DY-A-24 Dumps with 78 Questions [Q39-Q54]

Rate this post

Pass Exam With Full Sureness – D-VXB-DY-A-24 Dumps with 78 Questions

Verified D-VXB-DY-A-24 dumps Q&As – 100% Pass from PrepAwayTest

QUESTION 39
What is a required step when creating an NSX logical switch?

Create a new name for the logical switch

Change the default transport zone

Choose Unicast or Multicast replication mode

Choose Enable IP Discovery or Enable MAC Learning

QUESTION 40
What order of steps is taken when using an NSX edge service gateway with proxy mode load balancing?

QUESTION 41
A user cannot connect to Management switch 3172TQ. During troubleshooting it was discovered that the wrong IP was used in the SSH client.
What IP address should be used to establish the SSH connection to the Management switch?

192.168.1.1

10.10.10.2

192.168.1.2

10.10.10.1

QUESTION 42
What type of topology does the ACI fabric use?

Flat

Hierarchical

Tree

Spine Leaf

QUESTION 43
A customer has an existing ACI fabric. Their management has decided to invest in NSX for virtual networking but also retain ACI for their customers and for physical networking.
What is a consideration?

This solution is not possible. ACI takes care of virtual and physical networking.

The customer will need to provide traditional tree network environment for NSX because only ACI works with the spine and leaf model.

This solution is possible. The ACI APIC can be deployed as a virtual machine in virtual mode.

This solution is possible but may be cost prohibitive.

QUESTION 44
Who is responsible for raising the Internal Assessment (IA) during an RCM upgrade?

RCM Lead

Project Manager

Implementation Specialist

District Manager

QUESTION 45
What is encapsulated by a VxLAN?

Layer 2 Ethernet frames in Layer 3 UDP-IP packets

Layer 3 Ethernet frames in Layer 2 UDP-IP packets

Layer 3 UDP-IP packets in Layer 2 Ethernet frames

Layer 2 UDP-IP packets in Layer 3 Ethernet frames

QUESTION 46
A System Engineer is validating system cabling for a VxBlock 1000. They find that some ports on Fabric Interconnects 1A are not connected.
Which connections are missing?

Network uplinks to Nexus switches

Network uplinks to the customer network

SAN uplinks to MDS switches

Server uplinks to C-Series servers

QUESTION 47
Which document provides a high-level overview of what is being delivered?

Bill of Materials

Logical Configuration Survey

Solution Abstract

Site Survey

QUESTION 48
Which component is NOT part of the Cisco Application Centric Infrastructure?

NSX Manager

ACI Policy Model

Application Policy Infrastructure Controller

Nexus 9000 Series Switches

QUESTION 49
A VxBlock 1000 system engineer is powering on Advanced Management Pod components. If AMP-VX is used, what is the first component to be powered on?

VMware VCSA

Primary PSC

AMP physical server

Vision Core VM

QUESTION 50
A customer is planning to integrate a VxBlock to a new Cisco ACI fabric. What major physical connectivity change is needed if the customer intends to convert their existing VxBlock Nexus 9396PX switches to ACI mode?

Connect the switch directly to the APIC to download the ACI software. Then connect the existing Nexus
9396PX switches to a spine Nexus 93180YC switch.

Remove the dual peer link connection but keep the peer link connection for ACI fabric heartbeat traffic exchange.

Connect the Nexus 9396PX switch to spine Nexus 9500 switches. Remove other connections between the Nexus 9396PX switches.

Nexus 9396PX switch cannot be integrated directly to ACI fabric.

QUESTION 51
A customer has a physical server connected to an ACI fabric. The server was recently moved to a different leaf switch within the ACI fabric. The IP address of this server was also changed but is still part of its original EPG.
What is a consideration once the correct port configuration is pushed from the APIC?

The host must be removed, and the connections need to be re-assigned.

No configuration changes are required on the ACI fabric.

The switch must be moved with the machine to the new site.

The contract needs to be updated to reflect the new IP address.

QUESTION 52
Which NSX VMs run in the VxBlock AMP cluster?

NSX Edge gateways and NSX DLR

NSX Controllers and ESGs

NSX Manager and NSX Controllers

NSX Controllers and NSX Edge gateways

QUESTION 53
Based on CPSD guidelines for VxBlock 1000, how many UCS chassis can be installed in a single rack?

QUESTION 54
Which base feature of Isilon OneFS is enabled during the CPSD Logical Build process?

SynclQ

SMARTDEDUP

SMARTCONNECT

SnapshotIQ

D-VXB-DY-A-24 Dumps Full Questions – Exam Study Guide: https://www.prepawaytest.com/EMC/D-VXB-DY-A-24-practice-exam-dumps.html

Leave a Reply Cancel reply