[Aug 28, 2026] Pass API API-SIEE Exam Info and Free Practice Test [Q48-Q62]

4/5 - (1 vote)

[Aug 28, 2026] Pass API API-SIEE Exam Info and Free Practice Test

API-SIEE Exam Dumps PDF Updated Dump from PrepAwayTest Guaranteed Success

API API-SIEE Exam Overview:

Certification Vendor:	American Petroleum Institute (API)
Exam Name:	API Source Inspector Electrical Equipment (SIEE)
Exam Number:	SIEE
Exam Duration:	195 minutes
Related Certifications:	API Source Inspector Fixed Equipment (SIFE) API Source Inspector Rotating Equipment (SIRE)
Real Exam Qty:	110 (100 scored + 10 unscored pretest)
Exam Format:	Multiple Choice, Closed-book
Available Languages:	English
Certificate Validity Period:	3 years
Exam Registration:	API ICP Certification Portal
Sample Questions:	API API-SIEE Sample Questions
Exam Way:	Computer-based / remote proctored exam (scheduled exam windows)
Pre Condition:	Prequalification required; relevant electrical or inspection experience in industrial/petroleum environments is typically expected
Official Syllabus URL:	https://www.api.org/products-and-services/individual-certification-programs/certifications/apisiee

NO.48 Before starting surveillance, the source inspector should confirm that the supplier/vendor has:

only the latest code editions, regardless of contract requirements

the most current project documents specified in the engineering design

only verbal instructions from procurement

internal procedures but not drawings

NO.49 Apparent power is measured in:

mhos.

vars.

volt-amperes.

watts.

NO.50 What method is used to verify tightness of accessible bolted electrical connections?

Compression of the lock-nut

Visual inspection of torque markings

Verification of assembly check sheet

Calibrated torque wrench

NO.51 According to API 541, totally enclosed machines TEFC, TEPV, TEWAC, and TEAAC are equipped with which of the following?

Low-point drain

Heat exchanger cooling fan

Bearing RTDs

Surge protectors

NO.52 According to ANSI C57.12, the tank pressure under rated conditions of sealed transformers shall not exceed what value?

One atmosphere

Two atmospheres

Three atmospheres

Four atmospheres

NO.53 In addition to maximum rated voltage, manufacturer’s name, trademark and AWG, which of the following markings is required for all conductors and cables?

NEC class

Country of origin

Batch or lot number

Wire type designator

NO.54 According to the referenced API standard in the guide, special purpose induction motors covered by API STD
541 are:

100 hp and larger

250 hp and larger

375 kW (500 hp) and larger

1000 kW and larger only

NO.55 According to API 541, subsequent to completion of manufacture and testing, the vendor shall revise and resubmit the previously supplied purchase data including all the following except:

rotor-balance report.

operating manual.

as-built data sheet.

shop test data.

NO.56 The insulation requirement referred to in NEMA ICS 1 defines clearance as the shortest distance:

between the ground plane and the neutral conductor.

over the surface of an insulating material between two conducting parts.

measured through air between two conducting parts.

a person can approach a live conductor without initiating a hazardous arcing incident.

NO.57 In a Class I hazardous area, what is the maximum distance from an enclosure, containing arcing devices should a conduit seal be located?

4 inches 10.16 cm away from the closest union or coupling

10 inches 25.4 cm

12 inches 30.48 cm

18 inches 45.72 cm

NO.58 Which document should identify the inspection activities to be performed by the assigned source inspector and include the applicable acceptance criteria?

Purchase requisition

Inspection and Test Plan (ITP)

Shipping release form

Supplier observation report

NO.59 During switchgear source inspection, which item must be verified to prevent opening a medium-voltage door when the isolation switch handle is in the full ON position?

Space heater thermostat

Door interlock operation

Meter accuracy class

CT polarity marking

NO.60 What requirement shall be included in a lockout/tagout procedure?

A power testing requirement where a direct exposure situation can be detected

A voltage testing requirement where there might be direct exposure to electrical hazards

An arc flash requirement where a high level of exposure is foreseen

A voltage and current testing for direct exposure situations

NO.61 NEMA rated motor controllers require a minimum range of conductor sizes for a specific size controller.
Which of the following conductor sizes is appropriate for a Size 2 controller?

2/0 AWG -250MCM at 60°C rated cable and 2/0 AWG -350MCM at 75°C rated cable

2-2/0 AWG at 60°C rated cable and 2-4/0 AWG at 75°C rated cable

10-2/0 AWG at 60°C rated cable and 10-4/0 AWG at 75°C rated cable

10-4 AWG at 60°C rated cable and 10-6 AWG at 75°C rated cable

NO.62 According to ANSI/IEEE C37.20.2, wiring across a hinge shall be all of the following except:

sufficiently flexible to withstand repeated door movement without sustaining damage to wire strands or insulation.

installed in a flexible non-metallic conduit with a separate ground terminated at the door and at the switchgear ground bus and chosen per the minimum wire size table.

a formed loop as it crosses the hinge and secured to the equipment at both ends in such a manner that negligible strain is transmitted to wire beyond the securements.

No. 14 AWG and larger, and C or D stranding.

API API-SIEE Exam Syllabus Topics:

Topic	Details
Topic 1	Terms and Definitions: Covers the foundational terminology and definitions used throughout electrical source inspection work.
Topic 2	Equipment Risk Assessment: Focuses on developing inspection project plans, inspection and test plans, and reviewing reports to assess equipment risk.
Topic 3	Examination Methods, Tools and Equipment: Covers the inspection techniques used in the field, including dimensional, visual, electrical testing, functional testing, and coatings inspections.
Topic 4	Liquid-Immersed Transformers: Covers the design, construction, and applicable industry codes and standards for liquid-immersed transformers.
Topic 5	Electrical Inspection Tools and Test Equipment: Covers the tools and test equipment used by inspectors to perform electrical source inspections.
Topic 6	Motor Control Centers (Low to Medium Voltage): Covers design standards, materials, enclosure types, breakers, amp capacity, cable entry, and grounding components for MCCs.
Topic 7	Electrical Induction Motors: Covers design and construction standards, materials of construction, and motor testing requirements for electrical induction motors.

Pass Your API Exam with API-SIEE Exam Dumps: https://www.prepawaytest.com/API/API-SIEE-practice-exam-dumps.html

API API-SIEE Exam Overview:

API API-SIEE Exam Syllabus Topics:

Leave a Reply Cancel reply