[2022] 200-301.pdf - Questions Answers PDF Sample Questions Reliable [Q152-Q173]

NO.152 Refer to the exhibit.

Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?

eBGP

static

OSPF

EIGRP

NO.153 Drag and drop the network protocols from the left onto the correct transport services on the right.

NO.154 Refer to the exhibit.

Which command configures a floating static route to provide a backup to the primary link?

ip route 0.0.0.0 0.0.0.0 209.165.202.131

ip route 209.165.201.0 255.255.255.224 209.165.202.130

ip route 0.0.0.0 0.0.0.0 209.165.200.224

ip route 209.165.200.224 255.255.255.224 209.165.202.129 254

NO.155 Refer to the exhibit.

Router R2 is configured with multiple routes to reach network 10 1.1 0/24 from router R1. What protocol is chosen by router R2 to reach the destination network 10.1 1 0/24?

eBGP

static

OSPF

EIGRP

NO.156 Which functionality does an SVI provide?

OSI Layer 2 connectivity to switches

remote switch administration

traffic routing for VLANs

OSI Layer 3 connectivity to switches

NO.157 Which two statements about stateful firewalls in an enterprise network are true? (choose two)

They are more susceptible to DoS attacks than stateless firewalls

They can filter HTTP and HTTPS traffic in the inbound direction only

They are most effective when placed in front of the router connected to the internet

They can track the number of active TCP connections

They can use information about previous packets to make decisions about future packets

NO.158

Refer to the exhibit. How does router R1 handle traffic to 192.168.10.16?

It selects the IS-IS route because it has the shortest prefix inclusive of the destination address.

It selects the EIGRP route because it has the lowest administrative distance.

It selects the OSPF route because it has the lowest cost.

It selects the RIP route because it has the longest prefix inclusive of the destination address.

NO.159

Refer to the exhibit An engineer must configure GigabitEthemet1/1 to accommodate voice and data traffic.
Which configuration accomplishes this task?

Option A

Option B

Option C

Option D

NO.160 Drag and drop the functions from the left onto the correct network components on the right

NO.161 Refer to the exhibit.

What commands are needed to add a subinterface to Ethernet0/0 on R1 to allow for VLAN 20, with IP address
10.20.20.1/24?

R1(config)#interface ethernet0/0
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0

R1(config)#interface ethernet0/0.20
R1(config)#encapsulation dot1q 20
R1(config)#ip address 10.20.20.1 255.255.255.0

R1(config)#interface ethernet0/0.20
R1(config)#ip address 10.20.20.1 255.255.255.0

R1(config)#interface ethernet0/0
R1(config)#ip address 10.20.20.1 255.255.255.0

NO.162 Refer to the exhibit.

How does the router manage traffic to 192.168.12.16?

It selects the RIP route because it has the longest prefix inclusive of the destination address.

It chooses the OSPF route because it has the longest prefix inclusive of the destination address.

it load-balances traffic between all three routes

It chooses the EIGRP route because it has the lowest administrative distance

NO.163 What does a router do when configured with the default DNS lookup settings, and a URL is entered on the CLI?

initiates a ping request to the URL

prompts the user to specify the desired IP address

continuously attempts to resolve the URL until the command is cancelled

sends a broadcast message in an attempt to resolve the URL

NO.164 Which spanning-tree enhancement avoids the learning and listening states and immediately places ports in the forwarding state?

BPDUfilter

PortFast

Backbonefast

BPDUguard

NO.165 Which two WAN architecture options help a business scalability and reliability for the network? (Choose two)

asychronous routing

single-homed branches

dual-homed branches

static routing

dynamic routing

NO.166 Refer to Exhibit. An engineer is configuring the NEW York router to reach the Lo1 interface of the Atlanta router using interface Se0/0/0 as the primary path.
Which two commands must be configured on the New York router so that it can reach the Lo1 interface of the Atlanta router via Washington when the link between New York and Atlanta goes down? (Choose two)

ipv6 router 2000::1/128 2012::1

ipv6 router 2000::1/128 2012::1 5

ipv6 router 2000::1/128 2012::2

ipv6 router 2000::1/1282023::2 5

ipv6 router 2000::1/1282023::3 5

NO.167 Refer to the exhibit.

What is the effect of this configuration?

The switch port interface trust state becomes untrusted

The switch port remains administratively down until the interface is connected to another switch

Dynamic ARP inspection is disabled because the ARP ACL is missing

The switch port remains down until it is configured to trust or untrust incoming packets

NO.168 Refer to the exhibit.

If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command how does the router respond?

It ignores the new static route until the existing OSPF default route is removed

It immediately replaces the existing OSPF route in the routing table with the newly configured static route

It starts load-balancing traffic between the two default routes

It starts sending traffic without a specific matching entry in the routing table to GigabitEthernetO/1

NO.169 What is an advantage of Cisco DNA Center versus traditional campus device management?

It supports numerous extensibility options, including cross-domain adapters and third-party SDKs.

It enables easy autodiscovery of network elements in a brownfield deployment.

It is designed primarily to provide network assurance.

It supports high availability for management functions when operating in cluster mode.

NO.170 Refer to the exhibit.

A packet is being sent across router R1 to host 172.16.0.14. What is the destination route for the packet?

209.165.200.254 via Serial0/0/1

209.165.200.254 via Serial0/0/0

209.165.200.246 via Serial0/1/0

209.165.200.250 via Serial0/0/0

NO.171 Refer to the exhibit.

Which configuration on RTR-1 denies SSH access from PC-1 to any RTR-1 interface and allows all other traffic?

access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in

access-list 100 deny tcp host 172.16.1.33 any eq 22 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in

access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any interface GigabitEthernet0/0 ip access-group 100 in

access-list 100 deny tcp host 172.16.1.33 any eq 23 access-list 100 permit ip any any line vty 0 15 ip access-group 100 in

NO.172 Refer to the exhibit.

Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network. Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?

10.10.225.48 255.255.255.240

10.10.225.32 255.255.255.240

10.10.225.48 255.255.255.224

10.10.225.32 255.255.255.224

NO.173 Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)

Enable NTP authentication.

Verify the time zone.

Disable NTP broadcasts

Specify the IP address of the NTP server

Set the NTP server private key

[2022] 200-301.pdf – Questions Answers PDF Sample Questions Reliable [Q152-Q173]

Leave a Reply Cancel reply