Dec 25, 2022 Newest 3V0-21.21 Exam Dumps – Achieve Success in Actual 3V0-21.21 Exam [Q34-Q55]

NEW QUESTION 34
A VMware Service Provider is tasked with delivering a solution for continuous availability for a subset of Tier 1 virtual machines (VMs) and vApps running in their vSAN environment. The VMs make up a mission-critical application and there can be no data loss in the event of an outage at their primary data center. In the event of a regional outage, they have established a 10-minute recovery point objective (RPO). Failover/failback to the third site must be automated.
They have the following in place:
Two local data centers (primary and secondary) connected with 100 Gb dedicated fiber
2ms round-trip time (RTT) latency between the sites
A third data center located on another power grid
70ms latency between the primary and secondary data centers
Matching storage arrays at all locations
Which two solutions could be used to meet the requirements? (Choose two.)

NEW QUESTION 35
Which design decision must be included in a design to allow for the deployment of a minimum supported configuration of vCenter High Availability (HA)?

NEW QUESTION 36
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
The solution must initially support the concurrent running of 300 production and 600 development virtual machines.
The production environment should be delivered across two geographically dispersed data centers. The development environment must be vSphere-based but does not have to be deployed on-premises.
The two data centers are connected to each other through multiple diversely routed, high bandwidth and low latency links.
The customer’s server hardware standard document states that all virtual infrastructure hosts must be based on blade architecture only.
The service owner has said that is important to ensure that neither the availability target of 99.5% nor the resource capacity is affected when the operations team completes maintenance activities, such as the monthly software patching and ad-hoc hardware break/fix.
All virtual machine backups must be completed using the existing backup service. The recovery time objective (RTO) for the service is four hours.
The recovery point objective (RPO) of the service is 24 hours.
Given the information from the customer, which two would be classified as assumptions within the design? (Choose two.)

NEW QUESTION 37
An architect is tasked with designing a greenfield VMware software-defined data center (SDDC) solution that will be used to deliver a private cloud service for a customer.
During the initial meeting with the service owner and business sponsor, the customer has provided the following information to help inform the design:
The solution must support the concurrent running of 1,000 virtual machines The production environment must be delivered across two geographically dispersed data centers All virtual machines must be capable of running in either data center.
The two data centers are currently connected to each other through a single but diversely routed, high bandwidth and low latency link.
The link between the two data centers is capable of supporting a round-trip time (RTT) of 150 ms The existing server hardware standard document states that all virtual infrastructure hosts must be deployed using vSAN ReadyNodes The service owner has stated that it is critical to ensure the availability target of 99.9% All virtual machine backups must be completed using the existing backup service The recovery time objective (RTO) for the service is five minutes The recovery point objective (RPO) of the service is four hours Which two elements represent risks to the successful delivery of this solution? (Choose two.)

NEW QUESTION 38
An architect is finalizing the design for a new vSphere platform based on the following information:
All Windows virtual machines will be hosted on a dedicated cluster for licensing purposes.
All Linux virtual machines will be hosted on a dedicated cluster for licensing purposes. All management virtual machines will be hosted on a dedicated cluster.
A total of ten physical sites will be used to host virtual machines.
In the event of one physical datacenter becoming unavailable, the manageability of the virtual infrastructure in the remaining data centers should not be impacted.
Access to configure the management virtual machines via vCenter Server must be controlled through the management Active Directory domain.
Access to configure the Windows and Linux virtual machines must be controlled through the resource Active Directory domain.
The management and resource Active Directory domains are part of separate Active Directory forests and do not have any trusts between them.
The design will use Active Directory with Integrated Windows Authentication.
How should the architect document the vCenter Server configuration for this design?

NEW QUESTION 39
During a requirements gathering workshop, the customer provides the following requirement:
A new vSphere platform must be designed securely and all interfaces must be protected against potential snooping.
How should this non-functional security requirement be documented?

NEW QUESTION 40
Which two statements are true about gathering functional business and application requirements? (Choose two.)

NEW QUESTION 41
An architect is designing a new greenfield environment that will install ESXi on local disks. There is a requirement to streamline initial and future installations of ESXi hosts.
Which configuration option should the architect recommend for installing ESXi hosts to meet these requirements?

NEW QUESTION 42
An architect is designing a vSphere environment for a customer based on the following information:
The vSphere cluster will have three hosts only due to budget considerations.
A database cluster (node majority) consisting of three virtual machines will be running on the vSphere cluster.
Which two recommendations can the architect make so that the customer achieves the highest level of application availability while taking into consideration operational resiliency? (Choose two.)

NEW QUESTION 43
Refer to the exhibit.
During a requirements gathering workshop, the architect shares the following diagram:

What should the architect recommend for guaranteed throughput for each service?

NEW QUESTION 44
An architect is designing a solution for an environment with two types of resource profiles that must be virtualized. The first type consists of Tier 1 virtual machines that are disk I/O intensive, but do NOT require high CPU or memory. The second type consists of Tier 2 virtual machines that require a lower CPU and memory allocation and have minimal disk I/O.
Which design recommendation should the architect make for distributing the resource profiles?

NEW QUESTION 45
An architect is designing a VMware solution for a customer based on the following information:
The solution must use investments in existing storage array that supports both block and file storage.
The solution must support the ability to migrate workloads between hosts within a cluster.
The solution must support resource management priorities.
The solution must support the ability to connect virtual machines directly to LUNs.
The solution should use existing IPv4 based network infrastructure.
There is no budget for additional physical hardware.
Which two design decisions could the architect make to meet these requirements? (Choose two.)

NEW QUESTION 46
During a transformation project kick-off meeting, an architect highlights specific areas on which to focus while developing the new conceptual design.
Which two of the listed statements are business requirements? (Choose two.)

NEW QUESTION 47
Which design decision must be included in a design to allow for the deployment of a minimum supported configuration of vCenter High Availability (HA)?

NEW QUESTION 48
Which two statements are true about gathering functional business and application requirements? (Choose two.)

NEW QUESTION 49
An architect is preparing a design for a company planning digital transformation. During the requirements gathering workshop, the following requirements (REQ) and constraints (CON) are identified:
REQ01 The platform must host different types of workloads including applications that must be compliant with internal security standard.
REQ02 The infrastructure must initially run 100 virtual machines.
REQ03 Ten of the virtual machines must be compliant with internal security standard.
REQ04 The internal security standard specifies logical network separation for in-scope applications.
CON01 The customer has already purchased the licenses as part of another project.
CON02 The customer has five physical servers that must be reused.
Additionally, based on resource requirements, four physical servers will be enough to run all workloads. Which recommendation should the architect make to meet requirements while minimizing project costs?

NEW QUESTION 50
An architect is designing a VMware software-defined data center (SDDC) solution based on the following customer requirements:
The solution must initially support 1,000 virtual machines
The solution must scale to support the concurrent running of up to 5,000 virtual machines The production environment should be delivered across two data centers The solution should have a maximum tolerable downtime (MTD) of four hours The solution should have a monthly service availability target of 99.8% Which two assumptions could the architect make based on the information from the customer to help size the solution? (Choose two.)

NEW QUESTION 51
An architect is designing storage for a new vSphere environment to meet the following requirements:
Asynchronous replication is required between two sites.
The impact on the storage layer should not impact the performance of the compute layer.
Each application tier will require different replication attributes.
Virtual machine live migration across compute and storage must be supported.
Virtual machine aware back up will be leveraged.
Operational management overhead should be minimized.
Operational automation should be supported.
Which storage design recommendations would meet the requirements?

NEW QUESTION 52
An architect is tasked with reviewing the design of a VMware software-defined data center (SDDC) for a software development company. The platform is used to developing applications and services. It is important that the customer be able to accurately benchmark performance of developed applications.
The platform has recently commissioned new hosts to update the development cluster.
The development cluster host configuration is:
* 4 ESXi hosts with 2 sockets × 16 cores
* 512 GB RAM divided evenly between sockets
* There is no resource contention
The benchmarking cluster host configuration is:
* 8 ESXi hosts with 2 sockets × 8 cores
* 256 GB RAM divided evenly between sockets
* There is no resource contention
The customer is developing an application that includes a database virtual machine. The application developer states that the database virtual machine performs as required only when allocated 8 vCPUs 256 GB RAM. The database virtual machine performance meets the required levels when run from the development cluster.
Performance benchmarking for the database virtual machine yields highly variable results when run from the benchmarking cluster. The application cannot be released without reliable performance benchmarking data.
What is a possible reason for the difference in performance test results between the development and benchmarking clusters?

NEW QUESTION 53
An architect is designing a VMware solution for a customer based on the following information:
The solution must use investments in existing storage array that supports both block and file storage.
The solution must support the ability to migrate workloads between hosts within a cluster.
The solution must support resource management priorities.
The solution must support the ability to connect virtual machines directly to LUNs.
The solution should use existing IPv4 based network infrastructure.
There is no budget for additional physical hardware.
Which two design decisions could the architect make to meet these requirements? (Choose two.)

NEW QUESTION 54
An architect is designing a new VMware software-defined data center (SDDC) that will consist of 100 branch sites connected to a single VMware vCenter Server within the primary data center. To allow for the use of existing automation scripts, there is a requirement to replicate the names of the virtual distributed port groups across all sites. The procurement team purchases licensing and there is no further budget allocated.
Which design decision should the architect make to meet this requirement?

NEW QUESTION 55
An architect is tasked with designing a new VMware software-defined data center (SDDC) using VMware vSAN. The architect uses a storage assessment tool to determine the storage requirements for the new vSAN cluster. The new SDDC is going to be deployed into the existing data center and must be connected to a shared core network switch.
The architect decides to use vSAN ReadyNodes with the following configuration:
Two disk groups with:
Write Intensive NVMe 800 GB drive for cache
Four 3.84 TB Mixed Use NVMe for capacity
Four 10 GbE ports
Which element represents a risk that should be included in this design?