Real TAE Dumps – BCS Correct Answers updated on 2023 [Q22-Q37]

Rate this post

Use Real TAE Dumps – BCS Correct Answers updated on 2023

BCS Certification TAE Exam Practice Dumps

Q22. Assume that you are the TAE responsible for the correct functioning of a TAS, deployed in a test environment that consists of a few machines running the same version of the operating system. The TAS has been working and stable since its deployment, it has been used to run an automated test suite consisting of many similar automated test. The infrastructure team is planning to update the operating system on these machines by installing a new the service pack for security reasons. Since the vendor of the operating system assurance full backward compatibility, the infrastructure team assurance that there will be no impacts on the functioning of the TAS.
What is the BEST approach to confirm the correct functioning of the TAS in this scenario?

Verify the behavior of the automated tests by running a small tests, then gradually run the remaining tests to confirm the correct functioning of the whole automated test suite.

Make sure that the infrastructure team has completed installing the service pack on the machines where SUT is running, then run the whole automated test suite to verify its behavior

Verify the behavior of the whole automated test suite by running all the automated tests

Do not run any tests because you can immediately confirm the correct functioning of the automated test suite

Q23. Consider the following layers of the gTAA structure:
a. Test generation layer
b. Test definition layer
c. Test execution layer
d. Test execution layer
Consider the following capabilities associated with these layers.
Acquire all thenecessary resources before each test and release all after run, in order to avoid interdependences between test Allow the automated test scripts on an abstract level to interact with components, configurations and interfaces of the SUT.
Design test directives that allow configuring the algorithms used to automatically produce the test cases a given model of the SUT.
Allow the definition and implementation of test cases and data by means of templates and/or guidelines.
Which of the following BEST matches each layer with the appropriate capability?

a-3, b-4, c-1, d-2

a-4, b-3, c-1, d-2

a-4, b-3, c-2, d-1

a-3, b-4, c-2, d-1

Q24. A regression test suite consist of 500 test cases which are allexecuted manually. The business case for a pilot project is based on the adoption of test automation using a commercial tool that will reduce the execution time by a factor of 90% for 100% of the tests in the regression test suite. The pilot project lastedone month ( as planned) and you are currently its results. At the end of the pilot project, 40% of the regression tests have been automated and their execution time has been reduce by 60%.
Which of the following statements is TRUE in this scenario?

Theduration of the pilot project was too short -it should last unit the success factors are achieved

The target defined for the business case is too accurate -it should not be measureable

The project selected for the pilot is too critical -if should not be too critical or too trivial

The target defined for the business case seems difficult to hit – it should be realistic

Q25. Designing the System Under Test (SUT) for testability is important for a good test automation approach and can also benefit manual test execution.
Which of the following is NOT a consideration when designing for testability?

Observability: The SUT needs to provide interface that give insight into the system.

Re-useability: The code written for the SUT must be re-useable for other similar system.

Clearly defined architecture: The SUT Architecture needs to provide clear and understandable interfaces giving control and visibility on all test levels.

Control: the SUT needs to provide interfaces that can be used to perform actions on SUT.

Q26. A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have been asked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?

Maturity of the test process

Complexity to automate

Frequency of use

Sustainability of the automated environment

Q27. Consider a SUT that small run on multiple platform during the execution of automated test runs. In each test run an automated test suite needs to be executed, with the same version of the TAF, against the same version of the SUT of each platform. Each platform shall have its own dedicated test environment. Your goal is to implement a process as automated as possible ( i.e with minimal manual intervention) that allows implementing a consistent setup of the TAS across the multiple test environments.
Which two of the following aspects are MOST relevant for achieving your goal in this scenario?
* The configuration of the TAS uses automated installation scripts
* The TAF saves the logs needed to debug errors in XML format
C) Features of the TAF not used by the automated tests have been tested D) All the automated test cases contain the expected results E) The TAS components are under configuration management

A and e

B and c

B and d

A and d

Q28. A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?

Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort

The introduction of a new feature could require updates or additions to the testware components

The test automation engineer should work with the business analysts to ensure the new feature is testable

It is generally more difficult to automate test cases for a new feature as the developmenthas not yet started

Q29. Consider A TAS for testing adesktop application via its GUI. All the test cases of the automated test suite contain the same identical sequences of steps at the beginning (to create the necessary objects when doing a preliminary configuration of the test environment and at the end (to remove everything created -specifically for the test itself during the preliminary configuration of the test environment). All automated test cases use the same set of assertion functions from a shared library, for verifying the values in the GUI fields( e.g text boxes).
What is the BEST recommendation for improving the TAS?

Implementing keywords with higher level of granularity

Improving the architecture of the application in order to improve its testability

Adopting a set of standard verification methods for use by all automated tests

Implementing standard setup and teardown functions at test case level

Q30. Which of the following success factors for a test automation project is TRUE?

Automated tests must be designed to capture only the datathat is strictly needed for comparing expected and actual results

The test cases to be automated first must always be selected based on the number of times a test will need to be run

The test cases to be automated must have a high dependency on particular data values

Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite

Q31. Which of the following statement about the implementation of automated regression testing is FALSE?

When automating regression tests, the structure of automated tests must always be thesame as the corresponding manual tests

When automating regression tests, the corresponding manual tests should have already been executed to verify they operate correctly

When automating regression tests, the initialization steps set the testpreconditions should be automated wherever possible

When automating regression tests, consideration should be given to how much time would be saved by automation

Q32. Which of the following statements does NOT describe good practice for maintaining the TAS?

The TAS must run in the development environment because development and programming knowledge are required for its maintainability

The TAS must be under configuration management, along with the test suite, the testware artefacts and the test environment in which it runs

The TAS must separate the test scripts from the environment in which it runs and from the associated harnesses and artefacts

The TAS must consist of components that can be easily replaced without affecting the overall behavior of the TAS itself

Q33. You are currently designing the TAA of a TAS. You have been asked to adopt an approach forautomatically generating and executing test cases from a model that defines the SUT. The SUT is a state-based and event-driven that is described by a finite-state machine and exposes its functionality via an API. The behavior of the SUT depends on hardwareand communication links that can be unreliable.
Which of the following aspects is MOST important when designing the TAA in this scenario?

Looking for tools that allows direct denoting of exceptions and actions depending on the SUT events.

Adopting a test definition strategy based on classification tree coverage for the test definition layer.

Looking for tools that allow performing setup and teardown of the test suites and the SUT.

Adopting a test definition strategy based on use case/exception case coverage for the definition layer.

Q34. A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been added to the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?

Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases

The configuration management process does not properly control the synchronization between software archives

The automated regression test suite is not run consistently for future releases.

The automated regression test suite has a narrower scope of functionality

Q35. Which of the following is NOT an advantage of test automation?

The ability to perform tests which would be difficult orimpossible to execute manually

The ability to run more tests in less time and therefore to make it possible to run them more often

The ability to find more defects with the same tests, compared to executing the same test manually

The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks

Q36. Your goal is to verify completeness, consistency and correct behavior of an automated test suite. The TAS has been proven to successfully install in the SUT environment. All the preliminary checks toverify the correct functioning of the automated test environment and test tool configuration, installation and setup have successfully completed.
Which of the following is NOT a relevant check for achieving your goal in this scenario?

Checking whether all the test cases contain the expected results

Checking whether the post condition have been fulfilled for all the test cases

Checking whether the loading of the TAS is repeatable in the SUT environment

Checking whether all the test casesproduce repeatable outcomes

Q37. A project consists of distributed teams working in a 24-hour environment, where activities happen at all hours of the day. This project adopts a CI (Continuous Integration) process when developer check-in code and consists of automated activities that include generating a build and deploying it to a test environment.
Automated integration tests are run multiple times a day. The project have asked for a report containing the automation test results for every build, which must be available 24/7 to the project team.
Which of the following would be the BEST way to automatically provides this report?

Store the execution results of the integration tests for the last build to adatabase (without overwriting the results from the previous builds), use this database to automatically update a dashboard containing the build history and test results accessible to the project team.

Store the execution result of the integration testsfor the last build to a database (overwriting the results from the previous build), automatically create a test execution report for this build send It via e-mail to the project team

Store the execution results of the integration tests for the last build to a database (without overwriting the results from the previous builds). Automatically create a test execution report for this build and send it via e-mail to the project team

Store the code coverage results of the integration tests for the last build to a database (without overwriting the results from the previous builds). And automatically create a chart showing the trend in code coverage and send via email to the project team.

Get ready to pass the TAE Exam right now using our BCS Certification Exam Package: https://www.prepawaytest.com/BCS/TAE-practice-exam-dumps.html

Leave a Reply Cancel reply