Practice on 2023 LATEST 300-420 Exam Updated 210 Questions [Q26-Q45]

Rate this post

Practice on 2023 LATEST 300-420 Exam Updated 210 Questions

Download Latest 300-420 Dumps with Authentic Real Exam QA’s

Cisco 300-420: Job roles associated with CCNP Enterprise certification

After successfully completing the 300-420 and 350-401 exams, you will become eligible for getting the CCNP Enterprise certificate. This option is highly beneficial, especially in terms of employment opportunities. There are several positions that you can apply for after obtaining this certification. Some of these job roles include the following:

  • Network Design Engineer;
  • Network Specialist;
  • Network Engineer;
  • Advanced Technician;
  • IT Team Leader;
  • Infrastructure Engineer;
  • Network Analyst;
  • VoIP Engineer;

With Cisco CCNP Enterprise on your resume, you can also count on good wages. According to surveys, the annual average salary of a Network Administrator is $67,002; the average income of a Network Engineer is 111,335 per year, while a Data Center Technician can earn an average of $110,901 per annum. If you are not convinced that obtaining this professional-level certificate is worth the effort, then you should consider the financial and career advantages that come with it.

Cisco 300-420: Recommended experience

To pass the 300-420 exam, the applicants should demonstrate their knowledge of enterprise design, including advanced enterprise campus networks, advanced addressing and routing solutions, security service, SDA, and network services. Also, they should have earned the Cisco CCNA certificate or its equivalent knowledge. However, this is not a prerequisite but just a recommendation. Moreover, the learners should be knowledgeable about automation and advanced enterprise campus networks. In addition, it is also recommended that they have expertise in advanced addressing and routing solutions.

 

NEW QUESTION 26
Which type of rendezvous point deployment is standards-based and supports dynamic RP discovery?

 
 
 
 

NEW QUESTION 27

Refer to the exhibit. An architect must design a solution to connect the two ASs. To optimize bandwidth, the design will implement load sharing between router R6 and router R4. Which solution should the design include?

 
 
 
 

NEW QUESTION 28
Drag and drop the characteristics from the left onto the Yang model they describe on the right.
Select and Place:

NEW QUESTION 29
Which two steps can be taken to improve convergence in an OSPF network? (Choose two.)

 
 
 
 
 

NEW QUESTION 30
A network engineer must design an MSDP multicast solution to provide RP resilience in a network with two separate domains. Also, multicast sources and receivers must register with the local RP. Which solution must the engineer choose?

 
 
 
 

NEW QUESTION 31
When designing interdomain multicast, which two protocols are deployed to achieve communication between multicast sources and receivers? (Choose two.)

 
 
 
 
 

NEW QUESTION 32
Drag and drop the characteristics from the left onto the correct telemetry mode on the right.

NEW QUESTION 33
Drag and drop the properties from the left onto the Cisco SD-WAN components that perform them on the right.

NEW QUESTION 34

Refer to the exhibit. All routers currently reside in OSPF area 0. The network manager recently used R1 and R2 as aggregation routers for remote branch locations and R3 and R4 for aggregation routers for remote office locations. The network has since been suffering from outages, which are causing frequent SPF runs. To enhance stability and introduce areas to the OSPF network with the minimal number of ABRs possible, which two solutions should the network manager recommend? (Choose two.)

 
 
 
 
 

NEW QUESTION 35
Drag and drop the descriptions from the left onto the Cisco SD-WAN component they describe on the right.

NEW QUESTION 36

Refer to the exhibit. Which two solutions maximize the use of the links between the core and distribution layers? (Choose two.)

 
 
 
 
 

NEW QUESTION 37
An engineer is working for a large cable TV provider that requires multiple sources streaming video on different channels using multicast with no rendezvous point. Which multicast protocol meets these requirements?

 
 
 
 

NEW QUESTION 38

Refer to the exhibit. The connection between SW2 and SW3 is fiber and occasionally experiences unidirectional link failure. An architect must optimize the network to reduce the change of layer2 forwarding loops when the link fails. Which solution should the architect include?

 
 
 
 

NEW QUESTION 39
A network engineer must segregate three interconnected campus networks using IS-IS routing. A two-layer hierarchy must be used to support large routing domains and to avoid more specific routes from each campus network being advertised to other campus network routers automatically. Which two actions does the engineer take to accomplish this segregation? (Choose two.)

 
 
 
 
 

NEW QUESTION 40

Refer to the exhibit. An engineer must optimize the traffic flow of the network. Which change provides a more efficient design between the access and the distribution layer?

 
 
 
 

NEW QUESTION 41
A company’s security policy requires that all connections between sites be encrypted in a manner that does not require maintenance of permanent tunnels. The sites are connected through a private MPLS-based service that uses a dynamically changing key and spoke-to-spoke communication. Which type of transport encryption must be used in this environment?

 
 
 
 

NEW QUESTION 42
Which control-plane technology allows the same subnet to exist across multiple network locations?

 
 
 
 

NEW QUESTION 43
What is one function of the vSmart controller in an SD-WAN deployment?

 
 
 
 

NEW QUESTION 44
A customer is discussing QoS requirements with a network consultant. The customer has specified that endto- end path verification is a requirement. Which QoS solution meets this requirement?

 
 
 
 

NEW QUESTION 45
Which two options can you use to configure an EIGRP stub router? (Choose two)

 
 
 
 
 
 

Cisco 300-420: What? And How?

Exam 300-420 is suitable for system administrators, network engineers, and networking design engineers. All in all, there are several knowledge areas that you need to have a deep understanding of in order to pass such a test successfully. Thus, you should be familiar with the following:

  • Fundamental wireless networking notions as well as terms;
  • Routing & switching basics;
  • Basic IP addressing and subnets;
  • Building simple LANs and basic network fundamentals.

The most important information to look for after knowing that you qualify for such an exam is the skills measured. Generally, it is usually stated clearly through the topics covered. For this test, the main objectives are network services, advanced enterprise networks, automation, advanced addressing and routing solutions, network services, as well as WAN for enterprise networks. The exam format is another detail that you need to know about. Overall, there will be 60 multiple-choice questions, which you should complete within 90 minutes. You will certainly be able to answer all of them and get more than 825 points if you prepare wisely. Therefore, consider going for the official training and other prep resources, such as study guides, videos, and sample questions. To sit for this test, you need to pay $300 for the voucher. Also, please note that you can take it in English or Japanese. After you pass 300-420, you will get one of the Specialist certificates and the CCNP Enterprise if you take the Cisco 350-401 as well. However, you should understand that these are not lifetime certificates. They will be valid for only 3 years. After this period, you will be required to recertify to gain the desired benefits. There are a number of ways to follow this process. You can do so by taking the necessary exams or completing education activities. What is more, you can also do a combination of both.

 

Authentic 300-420 Exam Dumps PDF – Feb-2023 Updated: https://www.prepawaytest.com/Cisco/300-420-practice-exam-dumps.html

Related Links: scalar.usc.edu fortunetelleroracle.com myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below