[Q23-Q38] Exam C-SACS-2316 Realistic Dumps Verified Questions Free [Jul 22, 2024]

Rate this post

Exam C-SACS-2316 Realistic Dumps Verified Questions Free [Jul 22, 2024]

Valid C-SACS-2316 Dumps for Helping Passing SAP Exam!

NO.23 Which design options are available when you create a new story? Note: There are 2 correct answers to this question.

Optimized

CSS

Style

Classic

NO.24 When you are adding a calculation to a table (see graphic below) and choose Single, to which of the following is the new column added?

Selected dimension member

Every dimension member

@Data model

Story repository

When you are adding a calculation to a table, you can choose from two options: Single or Multiple. The option determines how many new columns are added to the table based on the calculation. The options are:
Single: Adds one new column to the table with the calculation result for the selected dimension member. For example, if you select Soft Drinks and choose Single, you will get one new column with the calculation result for Soft Drinks only.
Multiple: Adds multiple new columns to the table with the calculation result for each dimension member. For example, if you select Soft Drinks and choose Multiple, you will get three new columns with the calculation result for Soft Drinks, Juice, and Alcohol.
Therefore, the correct answer is Selected dimension member, as it is the option that the new column is added to when you choose Single. Verified Reference:Create Calculations in Tables

NO.25 When converting a story to Optimized Design Experience, what happens if the story contains elements that are not yet supported?

You receive a warning with information about what you must change.

The unsupported elements are deleted.

The unsupported elements become placeholders.

You receive a warning that the story will be deleted.

NO.26 When you create a new story and select a responsive page, which choice are you offered?

Chart or Table

Mobile device or Desktop

Optimized or Classic Design Experience

Model or Dataset

When you create a new story and select a responsive page, you are offered the choice of Optimized or Classic Design Experience. This choice determines the design mode that you will use to create your story. The Optimized Design Experience is the newer and more advanced design option that offers several usability improvements and performance enhancements compared to the Classic Design Experience. However, the Optimized Design Experience also has some limitations and differences, such as the unavailability of some elements that are present in the Classic Design Experience1. Therefore, you should choose the design mode that best suits your needs and preferences. You can also switch between the design modes later, but you may lose some features or formatting in the process2.
Reference:
1: Choosing Between Optimized and Classic Design Modes – SAP Learning 2: Switching Between Optimized and Classic Design Modes – SAP Learning

NO.27 When you create a new story and select a responsive page, which choice are you offered?

? Chart or Table

Mobile device or Desktop

Optimized or Classic Design Experience

Model or Dataset

NO.28 What language does the Custom Expression Editor use?

JavaScript

Hypertext Markup Language

dWrangling Expression Language

Structured Query Language

The Custom Expression Editor is a tool that allows you to create complex calculations using a syntax called Wrangling Expression Language (WEL). WEL is a domain-specific language that is designed for data manipulation and analysis. WEL supports various operators, functions, and constants that you can use to create custom expressions. You can access the Custom Expression Editor from various places in SAP Analytics Cloud, such as models, stories, datasets, etc. Therefore, the correct answer is Wrangling Expression Language, as it is the language that the Custom Expression Editor uses. Verified Reference:Create Custom Expressions with the Custom Expression Editor

NO.29 In a story, to which of the following is chart scaling applied? Note: There are 2 correct answers to this question.

Specific page

All measures

All pages

Specific measure

Chart scaling is a feature that ensures that you have a meaningful display of values across multiple charts in a story. By default, charts are not scaled, which can lead to incorrect data analysis, particularly if users are not paying attention to the actual values displayed in the chart1.
Chart scaling is applied to the following:
Specific page: Chart scaling is applied to all of the charts on a page, but the scaling may be different for the same measure on different pages, because the scaling factor is calculated separately for each page1.
Specific measure: Chart scaling is applied to a specific measure in a chart, and it affects all the charts that contain that measure on the same page. You can exclude charts from the scaling by selecting the chart and choosing Exclude from Scaling in the context menu1.
Chart scaling is not applied to the following:
All measures: Chart scaling is not applied to all the measures in a story, only to the ones that are selected for scaling. You can select which measures to scale by choosing Scale Measures in the context menu of any chart on a page1.
All pages: Chart scaling is not applied to all the pages in a story, only to the ones that have scaling enabled. You can enable or disable scaling for a page by choosing Enable Scaling or Disable Scaling in the context menu of any chart on a page1.
Reference:
1: Chart Scaling – SAP Learning

NO.30 Please match layers that you can add to a Geo Map to their corresponding descriptions.A) Points of Interest Layer Choropleth/Drill B) LayerC) Feature LayerD) Flow LayerE) Heat Map Layer.

Sets of geographical data that can be added to a geo map and analyzed with reference to business data from a model-A

Uses external data from valid service URLs. This data is layered on top of your existing geo map to provide additional context-C

Uses color to visualize the data density of the selected measure-E

Applies blocks of shading to different geographical locations_B

Shows the connection between two locations-D

NO.31 Which of the following is a data source connection AND can be used in SAP Analytics Cloud to wrangle data?

Imported

Live

Public

NO.32 What is the maximum number of screens you can connect to the Digital Boardroom?

NO.33 What term refers to dimension members with no numeric data values associated with them?

Booked

Transformed

Unbooked

Exception aggregation

Unbooked is the term that refers to dimension members with no numeric data values associated with them. For example, if a dimension has members A, B, C, and D, and only A and B have numeric values in a measure column, then C and D are unbooked members. Booked, transformed, and exception aggregation are not terms that describe dimension members. Verified Reference: [SAP Analytics Cloud – Unbooked Data]

NO.34 What is a property of a public dataset?

It can be shared among different stories.

It can be converted to a model.

Its data is structured in a star schema.

Its data source can be changed.

NO.35 What story option can help you create a story as a launchpad to other stories?

Input control

Hyperlink

Linked Analysis

RSS Feed

The story option that can help you create a story as a launchpad to other stories is hyperlink. A hyperlink is a link that allows users to navigate from one location to another by clicking on it. You can use hyperlinks to link widgets, text, or images in a story to other stories in SAP Analytics Cloud, creating a launchpad effect. Input control, linked analysis, and RSS feed are not story options that can help you create a story as a launchpad to other stories; they are options that can help you filter data, link widgets, or display news feeds in a story. Verified Reference: [SAP Analytics Cloud – Hyperlinks]

NO.36 In the Optimized Design Experience, which SAP Analytics Cloud tool replaces Explorer?

Point of Interest

Data Analyzer

Modeler

Value Driver Trees

NO.37 Which link types can you use to blend data in a story? Note: There are 3 correct answers to this question.

Intersecting data only

Inner data

Outer data

All primary data

All data

The correct answers are
A) Intersecting data only, D) All primary data, and E) All data. These are the three link types that you can use to blend data in a story, according to the SAP Learning course on Blending Data in Models1. The link type determines how the dimension data from the primary and secondary models are displayed in the blended chart or table

NO.38 Which add-ons can you configure for a chart? Note: There are 2 correct answers to this question.

Variance

Scaling

Linked Analysis

In-Cell Charts

Loading …

SAP C-SACS-2316 Exam Syllabus Topics:

Topic	Details
Topic 1	Element positioning, configuration of tables, geo maps Sorting, ranking, calculation types, linked analysis
Topic 2	Describe formatting and styling chart scaling Describe Optimized Design Experience vs. Classic Design Experience
Topic 3	Describe filtering, blending data link types use Digital Boardroom, mobile app
Topic 4	Story principles and presentation Configuring story elements
Topic 5	explain best practices such as improving performance Design standards; layout types, templates; create stories; import data

C-SACS-2316 Exam Dumps For Certification Exam Preparation: https://www.prepawaytest.com/SAP/C-SACS-2316-practice-exam-dumps.html

SAP C-SACS-2316 Exam Syllabus Topics:

Leave a Reply Cancel reply