[Q19-Q42] 2025 Valid HPE7-A02 Dumps for Helping Passing HP Exam!

Rate this post

2025 Valid HPE7-A02 Dumps for Helping Passing HP Exam!

Download Free HP HPE7-A02 Exam Questions & Answer

HP HPE7-A02 exam is a proctored exam, which means that candidates will be monitored throughout the duration of the test. HPE7-A02 exam consists of 60 multiple-choice questions, and candidates will have 90 minutes to complete it. To pass the exam, candidates must score at least 70%.

NEW QUESTION 19
A company needs you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI). What is one task you should do to prepare?

Install the root CA for CPPM’s HTTPS certificate as trusted in the CPDI application.

Enable Insight in the CPPM server configuration settings.

Configure WMI, SSH, and SNMP external accounts for device scanning on CPPM.

Collect a Data Collector token from HPE Aruba Networking Central.

NEW QUESTION 20
You are establishing a cluster of HPE Aruba Networking ClearPass servers. (Assume that they are running version 6.9.).
For which type of certificate it is recommended to install a CA-signed certificate on the Subscriber before it joins the cluster?

Database

HTTPS

RADIUS/EAP

RadSec

NEW QUESTION 21
You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VolP phones are assigned to the
“voice” role and need to send traffic that is tagged for VLAN 12.
Where should you configure VLAN 12?

As the trunk native VLAN on edge ports and the trunk native VLAN on the “voice” role

As a trunk allowed VLAN on edge ports and the trunk native VLAN in the “voice” role

As the trunk native VLAN in the “voice” role (and not in the edge port settings)

As the allowed trunk VLAN in the “voice” role (and not in the edge port settings)

NEW QUESTION 22
Refer to Exhibit.

A company is using HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application).
In the CPDI interface, you go to the Generic Devices
page and see the view shown in the exhibit.
What correctly describes what you see?

Each cluster is a group of unclassified devices that CPDI’s machine learning has discovered to have similar attributes.

Each cluster is a group of devices that match one of the tags configured by admins.

Each cluster is all the devices that have been assigned to the same category by one of CPDI’s built-in system rules.

Each cluster is a group of devices that have been classified with user rules, but for which CPDI offers different recommendations.

NEW QUESTION 23
What is a benefit of Online Certificate Status Protocol (OCSP)?

It lets a device determine whether to trust a certificate without needing any root certificates installed.

It lets a device query whether a single certificate is revoked or not.

It lets a device download all the serial numbers for certificates revoked by a CA at once.

It lets a device dynamically renew its certificate before the certificate expires.

NEW QUESTION 24
A company needs you to integrate HPE Aruba Networking ClearPass Policy Manager (CPPM) with HPE Aruba Networking ClearPass Device Insight (CPDI).
What is one task you should do to prepare?

Install the root CA for CPPM’s HTTPS certificate as trusted in the CPDI application.

Configure WMI, SSH, and SNMP external accounts for device scanning on CPPM.

Enable Insight in the CPPM server configuration settings.

Collect a Data Collector token from HPE Aruba Networking Central.

NEW QUESTION 25
You have created this rule in an HPE Aruba Networking ClearPass Policy Manager (CPPM) service’s enforcement policy: IF Authorization [Endpoints Repository] Conflict EQUALS true THEN apply “quarantine_profile” What information can help you determine whether you need to configure cluster-wide profiler parameters to ignore some conflicts?

Whether the company has rare Internet of Things (loT) devices

Whether some devices are incapable of captive portal or 802.1X authentication

Whether the company has devices that use PXE boot

Whether some devices are running legacy operating systems

NEW QUESTION 26
A company already uses HPE Aruba Networking ClearPass Policy Manager (CPPM) as the RADIUS server for authenticating wireless clients with 802.1X. Now you are setting up 802.1X on AOS-CX switches to authenticate many of those same clients on wired connections. You decide to copy CPPM’s wireless 802.1X service and then edit it with a new name and enforcement policy. What else must you change for authentication to work properly?

Role mapping policy

Authentication methods

Authentication source

Service rules

NEW QUESTION 27
What role can Internet Key Exchange (IKE)/IKEv2 play in an HPE Aruba Networking client-to-site VPN?

It provides an alternative to IPsec that is suitable for legacy clients.

It provides a more modern and secure alternative to IPsec.

It helps to negotiate the IPsec SA automatically and securely.

It helps remote clients download IPsec profiles for later use.

NEW QUESTION 28
You are deploying a virtual Data Collector for use with HPE Aruba Networking ClearPass Device Insight (CPDI). You have identified VLAN 101 in the data center as the VLAN to which the Data Collector should connect to receive its IP address and connect to HPE Aruba Networking Central.
Which Data Collector virtual ports should you tell the virtual admins to connect to VLAN 101?

The one with the lowest MAC address

The one with the highest port ID

The one with the highest MAC address

The one with the lowest port ID

NEW QUESTION 29
Refer to the Exhibit:

These packets have been captured from VLAN 10. which supports clients that receive their IP addresses with DHCP.
What can you interpret from the packets that you see here?
These packets have been captured from VLAN 10, which supports clients that receive their IP addresses with DHCP. What can you interpret from the packets that you see here?

Someone is possibly implementing a MAC spoofing attack to gain unauthorized access.

The mirroring session that captured the packets was likely misconfigured and captured duplicate traffic.

An admin has likely misconfigured two clients to use the same DHCP settings.

Someone is possibly implementing an ARP poisoning and MITM attack.

NEW QUESTION 30
You are using Wireshark to view packets captured from HPE Aruba Networking infrastructure, but you’re not sure that the packets are displaying correctly. In which circumstance does it make sense to configure Wireshark to ignore protection bits with the IV for the 802.11 protocol?

When the traffic was captured on the data plane of an HPE Aruba Networking gateway and sent to a remote IP.

When the traffic was mirrored from an AOS-CX switch port connected to an AP.

When the traffic was captured from an AP with HPE Aruba Networking Central.

When the traffic was captured on the control plane of an HPE Aruba Networking MC and sent to a remote IP.

NEW QUESTION 31
Refer to the exhibit.

The exhibit shows a saved packet capture, which you have opened in Wireshark. You want to focus on the complete conversation between 10.1.70.90 and 10.1.79.11 that uses source port 5448.
What is a simple way to do this in Wireshark?

Apply a capture filter that selects for both the 10.1.70.90 and 10.1.79.11 IP addresses.

Click the Source column and then the Destination column to sort the packets into the desired order.

Apply a capture filter that selects for TCP port 5448.

Right-click one of the packets between those addresses and choose to follow the stream.

NEW QUESTION 32
You need to use “Tips:Posture” conditions within an 802.1X service’s enforcement policy.
Which guideline should you follow?

Enable caching roles and posture attributes from previous sessions in the service’s enforcement settings.

Create rules that assign postures in the service’s role mapping policy.

Enable profiling in the service’s general settings.

Select the Posture Policy type for the service’s enforcement policy.

NEW QUESTION 33
An AOS-CX switch has been configured to implement UBT to two HPE Aruba Networking gateways that implement VRRP on the users’ VLAN. What correctly describes how the switch tunnels UBT users’ traffic to those gateways?

The switch always sends the users’ traffic to the VRRP master.

The switch always sends all users’ traffic to the primary gateway configured in the UBT zone.

The switch always load shares the users’ traffic across both gateways.

The switch always sends all users’ traffic to the gateway assigned as the active device designed gateway.

NEW QUESTION 34
Refer to the exhibit:

The exhibit shows the TACACS+ enforcement profile that HPE Aruba Networking ClearPass Policy Manager (CPPM) assigns to a manager. When this manager logs into an AOS-CX switch, what does the switch do?

Assigns the manager operator-level privileges

Assigns the manager administrator-level privileges

Rejects the manager with an error message

Assigns the manager auditor-level privileges

NEW QUESTION 35
What is a benefit of Online Certificate Status Protocol (OCSP)?

It lets a device query whether a single certificate is revoked or not.

It lets a device dynamically renew its certificate before the certificate expires.

It lets a device download all the serial numbers for certificates revoked by a CA at once.

It lets a device determine whether to trust a certificate without needing any root certificates installed.

NEW QUESTION 36
Refer to Exhibit:

An HPE Aruba Networking 9×00 gateway is part of an HPE Aruba Networking Central group that has the settings shown in the exhibit. What would cause the gateway to drop traffic as part of its IDPS settings?

Its site-to-site VPN connections failing

Traffic matching a rule in the active ruleset

Its IDPS engine failing

Traffic showing anomalous behavior

NEW QUESTION 37
You need to set up HPE Aruba Networking ClearPass Policy Manager (CPPM) to provide certificate-based authentication of 802.1X supplicants.
How should you upload the root CA certificate for the supplicants’ certificates?

As a ClearPass Server certificate with the RADIUS/EAP usage

As a Trusted CA with the AD/LDAP usage

As a Trusted CA with the EAP usage

As a ClearPass Server certificate with the Database usage

NEW QUESTION 38
You are setting up user-based tunneling (UBT) between access layer AOS-CX switches and AOS-10 gateways. You have selected reserved (local) VLAN mode.
Tunneled devices include IoT devices, which should be assigned to:
* Roles: iot on the switches and iot-wired on the gateways
* VLAN: 64, for which the gateways route traffic.
IoT devices connect to the access layer switches’ edge ports, and the access layer switches reach the gateways on their uplinks.
Where must you configure VLAN 64?

In the iot-wired role and on no physical interfaces

In the iot role and the iot-wired role and on no physical interfaces

In the iot-wired role and the access switch uplinks

In the iot role and the access switch uplinks

NEW QUESTION 39
Assume that an AOS-CX switch is already implementing DHCP snooping and ARP inspection successfully on several VLANs.
What should you do to help minimize disruption time if the switch reboots?

Configure the switch to act as an ARP proxy.

Create static IP-to-MAC bindings for the DHCP and DNS servers.

Save the IP-to-MAC bindings to external storage.

Configure the IP helper address on this switch, rather than a core routing switch.

NEW QUESTION 40
A company wants to apply role-based access control lists (ACLs) on AOS-CX switches, which are implementing authentication to HPE Aruba Networking ClearPass Policy Manager (CPPM). The company wants to centralize configuration as much as possible. Which correctly describes your options?

You can configure the role on CPPM; however, the CPPM role must reference a policy name that is configured on the switch.

You can configure the role name on CPPM; however, the role settings, including policy and classes, must be configured locally on the switch.

You can configure the role, its policy, and the classes referenced in the policy all on CPPM.

You can configure the role and its policy on CPPM; however, the classes referenced in the policy must be configured locally on the switch.

NEW QUESTION 41
A company is using HPE Aruba Networking ClearPass Device Insight (CPDI) (the standalone application).
You have identified a device, which is currently
classified as one type, but you want to classify it as a custom type. You also want to classify all devices with similar attributes as this type, both already-discovered devices and new devices discovered later.
What should you do?

Create a user tag from the Generic Devices page, select the desired attributes for the tag, and save the tag.

In the device details, select reclassify, create a user rule based on its attributes, and choose “Save & Reclassify.”

In the device details, select filter, create a user tag based on the device attributes, and save the tag.

Create a user rule from the Generic Devices page, select the desired attributes for the rule, and choose
“Save.”

NEW QUESTION 42
You manage AOS-10 APs with HPE Aruba Networking Central. A role is configured on these APs with the following rules:
* Allow UDP on port 67 to any destination
* Allow any to network 10.1.6.0/23
* Deny any to network 10.1.0.0/16 + log
* Deny any to network 10.0.0.0/8
* Allow any to any destination
You add this new rule immediately before rule 2:
Deny SSH to network 10.1.4.0/23 + denylist
What happens when a client assigned to this role sends SSH traffic to 10.1.11.42?

The traffic is permitted.

The traffic is dropped and logged.

The traffic is dropped (without any logging or further action against the client).

The traffic is dropped, and the client is denylisted.

HP HPE7-A02 (Aruba Certified Network Security Professional) Certification Exam is designed for IT professionals who specialize in network security. Aruba Certified Network Security Professional Exam certification exam is offered by HP, a global leader in information technology, and is widely recognized as a benchmark for network security expertise. The HPE7-A02 certification exam is a comprehensive test of an IT professional’s knowledge of network security concepts and their ability to implement these concepts in real-world scenarios.

HPE7-A02 Exam Dumps For Certification Exam Preparation: https://www.prepawaytest.com/HP/HPE7-A02-practice-exam-dumps.html

Leave a Reply Cancel reply