[Sep 02, 2026] Uplift Your HPE6-A85 Exam Marks With The Help of HPE6-A85 Dumps [Q21-Q38]

5/5 - (1 vote)

[Sep 02, 2026] Uplift Your HPE6-A85 Exam Marks With The Help of HPE6-A85 Dumps

Use HP HPE6-A85 Dumps To Succeed Instantly in HPE6-A85 Exam

NO.21 What is the most common fiber-connector used for AOS-CX switches?

LC/APC

NO.22 How does the Aruba Mobility Controller handle Layer 3 mobility in a campus network?

By maintaining a tunnel to each access point for seamless user transitions.

Mobility does not require any special handling at Layer 3.

By assigning a unique IP subnet to each wireless client.

Through a centralized database that tracks the location and movement of users.

NO.23 What is an advantage of using Layer 2 MAC authentication?

it matches user names to MAC address

No setup is required on the client

MAC allow lists are easily maintained over time

MAC identifiers are hard to spoof

NO.24 You are in a meeting with a customer where you are asked to explain the network redundancy feature VRRP. What is the correct statement for this feature?

preempt feature is disabled by default on default VRF

preempt feature improves VRRP failover time for VIDs

preempt feature will resume VRRP primary role on master after a recovery

preempt feature will retain VRRP primary role on standby after a recovery

NO.25 What is an advantage of using Layer 2 MAC authentication?

it matches user names to MAC address

No setup is required on the client

MAC allow lists are easily maintained over time

MAC identifiers are hard to spoof

NO.26 An AOS-CX, what is the correct command to add a static route to a class-c-network 10.2.10.0 via a gateway of 172.16.1.1?

ip-route 10.2.10.0/24 172.16.1.1

ip route 10.2.10.0 255.255.255.0 172.16.1.1 description aruba

ip route 10.2.10.0/24 172.16.1.1

ip route-static 10.2.10.0 255.255.255.0 172.16.1.1

NO.27 Which device configuration group types can a user define in Aruba Central during group creation?
(Select two.)

Security group

Template group

Default group

Ul group

ESP group

NO.28 DRAG DROP
Match the Open Systems Interconnection (OSI) layer with its comparable member of the TCP/IP stack.
(Options may be used more than once.)

NO.29 When using the OSPF dynamic routing protocol on an Aruba CX switch, what must match on the neighboring devices to exchange routes?

Hello timers

DR configuration

ECMP method

BDR configuration

NO.30 What is the ideal mounting position for a typical HPE Aruba Networking indoor AP?

Horizontal, below a suspended ceiling

Under a office desk

Horizontal, above a suspended ceiling

Vertical, at a wall

NO.31 A network technician at a branch office is connecting VolP phones to a newly configured AOS-CX switch.
Users are complaining that voice quality is not as good as at the corporate office. Further investigation shows the local-priority value at the branch office is 1 while at the corporate office is 5.
What describes the issue regarding the default QoS behavior on the AOS-CX switch?

The QoS trust is set to DSCP by default, and the VolP phone’s local-priority value is mapped to 1.

The QoS trust is set to CoS by default, and the VolP phone’s local-priority value is mapped to 1.

The QoS trust is set to none by default, and each VolP phone’s local priority is configured for CoS map entry 1.

The QoS trust is set to none by default, and each VolP phone’s local priority is configured for CoS map entry 0.

NO.32 Refer to Exhibit.

Which server will receive the smallest quantity of data?

172.17.17.43

10.100.100.25

10.99.26.25

192.168.0.56

NO.33 Which statement about manual switch provisioning with Aruba Central is correct?

Manual provisioning does not require DHCP and requires DNS

Manual provisioning does not require DHCP and does not require DNS

Manual provisioning requires DHCP and does not require DNS

Manual provisioning requires DHCP and requires DNS

NO.34 You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

The physical interfaces are not members of the correct LAG.

Spanning-Tree block state is preventing the Core uplink from having connectivity to the edge

The Core is connected to the incorrect physical interlaces

LACP is not configured on the Core uplink

NO.35 Switch A is configured with priority 80 and an IP address of 10.10.10.2/24. Switch B is configured with priority 80 and an IP address of 10.10.10.3/24. Both Switches are configured with VRRP and VID of 10.10.10.1. Which switch will become the master in a normal operation?

Switch B is the master.

Both switches are masters until one switch fails.

Switch A is the master.

The configuration is invalid. VRRP will not work when two switches have the same priority.

NO.36 Based on the given topology, what is the requirement on an Aruba switch to enable LLDP messages to be received by Switch 1 port 1/1/24. when Router 1 is enabled with LLDP?

global configuration lldp enable

int 1/1/24, no cdp

int 1/1/24, lldp receive

LLDP is enabled by default

NO.37 You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports, 2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available bandwidth possible. What should you configure?

a 16-member LAG using 2 SFP28 ports and 6 SR5 ports on each switch

an eight-member LAG using 4 SR5 ports on each switch

an eight-member LAG using 2 SFP28 ports and 2 SR5 ports on each switch

a four-member LAG using 2 SFP28 ports on each switch

NO.38 You have been asked to troubleshoot failed connectivity between a local subnet in the HQ Office and a remote subnet in the Branch Office. PC1 is unable to ping PC2.
Use the provided topology and show command output to identify the reason for the failure: