[Oct 29, 2026] PrepAwayTest SD-WAN-Engineer Exam Practice Test Questions (Updated 88 Questions) [Q10-Q26]

Rate this post

[Oct 29, 2026] PrepAwayTest SD-WAN-Engineer Exam Practice Test Questions (Updated 88 Questions)

Pass Palo Alto Networks SD-WAN-Engineer Exam Info and Free Practice Test

Palo Alto Networks SD-WAN-Engineer Exam Syllabus Topics:

Topic Details
Topic 1
  • Deployment and Configuration: This domain focuses on Prisma SD-WAN deployment procedures, site-specific settings, configuration templates for different locations, routing protocol tuning, and VRF implementation for network segmentation.
Topic 2
  • Planning and Design: This domain covers SD-WAN planning fundamentals including device selection, bandwidth and licensing planning, network assessment, data center and branch configurations, security requirements, high availability, and policy design for path, security, QoS, performance, and NAT.
Topic 3
  • Operations and Monitoring: This domain addresses monitoring device statistics, controller events, alerts, WAN Clarity reports, real-time network visibility tools, and SASE-related event management.
Topic 4
  • Troubleshooting: This domain focuses on resolving connectivity, routing, forwarding, application performance, and policy issues using co-pilot data analysis and analytics for network optimization and reporting.
Topic 5
  • Unified SASE: This domain covers Prisma SD-WAN integration with Prisma Access, ADEM configuration, IoT connectivity via Device-ID, Cloud Identity Engine integration, and User
  • Group-based policy implementation.

 

NO.10 An administrator needs to generate a monthly report showing the “Top Applications” by bandwidth usage across all branch sites to justify a bandwidth upgrade.
Which specific component of the Prisma SD-WAN interface is designed to create, schedule, and email these PDF summaries?

 
 
 
 

NO.11 Which configuration requirement must be met to allow two branch ION devices to automatically establish a direct Dynamic VPN (branch-to-branch) connection for traffic flow, bypassing the Data Center?

 
 
 
 

NO.12 A multinational company is deploying Prisma SD-WAN across North America, Europe, and Asi a. The data centers in the North America region have served all regions, but regional policies are now being enforced that mandate each of the regions to build their own data centers and branch sites to only connect to their respective regional data centers.
How can this regionalization be achieved so that new or existing branch sites only build tunnels to the regional DC IONs?

 
 
 
 

NO.13 By default, how many days will Prisma SD-WAN VPNs stay operational before the keys expire when an ION device loses connection with the controller?

 
 
 
 

NO.14 Based on the HA topology image below, which two statements describe the end-state when power is removed from the ION 1200-S labeled “Active”, assuming that the ION labeled “Standby” becomes the active ION?
(Choose two.)

 
 
 
 

NO.15 A remote branch site is reporting intermittent connectivity to the Data Center. The administrator checks the System > Alarms page and sees a “VPN_DOWN” alarm for the tunnel to the DC. However, the internet circuit status is “Up”.
Which specific log file or diagnostic tool in the Prisma SD-WAN portal would provide the IKE (Internet Key Exchange) error codes (e.g., “NO_PROPOSAL_CHOSEN” or “AUTH_FAILED”) to pinpoint the cause of the tunnel failure?

 
 
 
 

NO.16 An administrator is configuring an ION 2000 device for a deployment where high availability is required, but the site has only a single internet circuit. The administrator configures a Bypass Pair (Fail-to-Wire) on ports 1 and 2 connecting the ISP modem to the legacy firewall.
If the ION device loses power, what is the resulting behavior of the traffic flowing through this Bypass Pair?

 
 
 
 

NO.17 In a Prisma SD-WAN deployment, what is the defining characteristic of a “Standard VPN” compared to a “Secure Fabric Link”?

 
 
 
 

NO.18 A network administrator is viewing the Flow Browser to investigate a report that a specific user cannot access an internal web server. The flow entry for this traffic shows the “Flow State” as “INIT” and it remains in that state until it times out.
What does the “INIT” state indicate about the traffic flow?

 
 
 
 

NO.19 Which statement is valid when integrating Prisma SD-WAN with Prisma Access remote networks?

 
 
 
 

NO.20 How can a network administrator detect a site outage or a service-level agreement (SLA) violation using controller-generated incidents?

 
 
 
 

NO.21 Which implementation allows Prisma SD-WAN to improve application performance for organizations facing inconsistent user experiences across branch locations, especially due to varying device types and network conditions, by using Layer 4 and Layer 7 optimization to boost throughput?

 
 
 
 

NO.22 When integrating Prisma SD-WAN with Prisma Access, what is the specific role of the Service Connection (SC)?

 
 
 
 

NO.23 Two branch sites, “Branch-A” and “Branch-B”, are both behind active NAT devices (Source NAT) on their local internet circuits.
What requirement must be met for these two branches to successfully establish a direct Dynamic VPN (ION- to-ION) tunnel over the internet?

 
 
 
 

NO.24 While designing a greenfield Prisma SD-WAN solution for a retailer, the risk management group requires segmentation of the retail network to avoid one large fault domain.
The following data points are provided:
* Two data centers and all sites need to access applications in both data centers
* 1000 retail branches with stores concentrated in multiple metropolitan areas
* Data Center 1 and Data Center 2 have different sets of applications that are not replicated
* Maintaining application availability is the primary goal
Which action will segment the retail network and reduce regional outages?

 
 
 
 

NO.25 In a data center (DC) with two ION devices, all of the remote branch Prisma SD-WAN VPNs are active only on DC ION-1.
Why are no VPNs active on DC ION-2?

 
 
 
 

NO.26 Which troubleshooting step should be taken when users at a branch site are experiencing a maximum throughput of 200 Mbps for Direct Internet Access (DIA) traffic on a 1 Gbps internet connection?

 
 
 
 

Pass Your Palo Alto Networks Exam with SD-WAN-Engineer Exam Dumps: https://www.prepawaytest.com/Palo-Alto-Networks/SD-WAN-Engineer-practice-exam-dumps.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below