Get Started C-TS422-2023 Exam [2026] Dumps SAP PDF Questions [Q21-Q39]

QUESTION 21
You want to insert an operation at a certain time on a work center in the graphical planning table. The planning direction is forward. The desired dispatching time coincides with an operation that has previously been dispatched. How does the insertion take place?

The previously dispatched operation stays as is; the new operation is inserted before the dispatched operation.

The previously dispatched operation stays as is; the new operation is inserted after the dispatched operation.

The new operation is inserted at the desired time; the previously dispatched operation is moved forward.

The new operation is inserted at the desired time; the previously dispatched operation is moved backward.

QUESTION 22
How can a material availability check be triggered automatically for a production order? Note: There are
2 correct answers to this question.

By capacity planning

By order confirmation

By order release

By mass processing

QUESTION 23
Which of the following processes lead to an entry in the MRP planning file?
Note: There are 2 correct answers to this question.

Changing the delivery address in transportation management

Changing the storage bin in warehouse management

Changing the procurement type in the product master

Changing the stock in inventory management

QUESTION 24
What is the work center hierarchy in capacity planning?

A group of work center in a parallel sequence that is used to split production quantities and work on them in parallel

A group of alternative work centers providing a cumulative available capacity for production

A group of work centers in a production line being used in sequence for production

A group of alternative work centers for production, structured in hierarchy levels by priorities

QUESTION 25
What data can you maintain in the subitems of a bill of material (BOM)?
Note: There are 2 correct answers to this question.

Installation point

Item type

Quantity

Scrap percentage

QUESTION 26
What is the difference between co-products and by-products?

Only co-products are identified by a special item category in the bill of material (BOM)

Only co-products can be manufactured in isolation from the main product

Only co-products have a zero inventory valuation

Only co-products appear in the process or production order settlement rule

The difference between co-products and by-products is mainly in how they are accounted for in the production process. Co-products are products that have a relatively high sales value and are produced simultaneously from the same production process. By-products are products that have a relatively low sales value and are produced as a side effect of the main product. The following points explain the difference between them:
Only co-products are identified by a special item category in the bill of material (BOM). This item category is L (Co-product) and it indicates that the component is a co-product that shares the joint costs of the production process with the main product and other co-products. By-products do not have a special item category in the BOM. They are usually entered with a negative quantity and a negative item category, such as N (By-product)12.
Only co-products can be manufactured in isolation from the main product. This means that co-products can be produced independently from the main product if there is a demand for them. By-products cannot be manufactured in isolation from the main product. They are always produced as a result of the main product3 .
Only co-products have a zero inventory valuation. This means that co-products do not have a price in the material master and their inventory value is calculated based on the apportionment of the joint costs of the production process. By-products have a fixed inventory valuation based on the price specified by the price control in the material master. Their inventory value does not depend on the production process12.
Only co-products appear in the process or production order settlement rule. This means that co-products are settled to different receivers, such as sales orders, cost centers, or profitability segments, based on the apportionment structure defined in the material master of the leading co-product. By-products do not appear in the settlement rule. They are credited to the production order and reduce the total costs of the process12.
Reference:
1: SAP Help Portal: Co- and By-Products
2: SAP S/4HANA Production Planning and Manufacturing Certification Guide, Chapter 8: Product Compliance
3: SAP Co-Products and By-Products Tutorial – Free SAP PP Training – ERProof3
4: Co-Product and By-product in Production order | SAP Blogs2

QUESTION 27
Which of the following processes lead to an entry in the MRP planning file?
Note: There are 3 correct answers to this question.

Changing the storage bin in warehouse management

Changing the procurement type in the product master

Changing the operation times in the production data structure

Changing the stock in inventory management

Changing the purchasing contract in materials management

QUESTION 28
Your quality department detects a deviation in a raw material batch. Unfortunately, this batch has already been used in production. How can you identify all affected finished goods stocks? Note: There are 2 correct answers to this question.

Use batch determination.

Use the Batch Information Cockpit.

Use the batch where-used list.

Use batch derivation.

QUESTION 29
How can you support a GMP (Good Manufacturing Practice) compliant production process? Note: There are 3 correct answers to this question.

Digital signature

Approved resources

Recipe approval

GMPcompliant flag

Batch record

QUESTION 30
Generic Parent » Generic 1 pt
What is the purpose of collective orders?

To manage production orders for an entire finished product on multiple levels

To combine order management of co-products and by-products with the main product

To post production costs on a cost collector instead of the production order

To post any component withdrawal as single backflush with order confirmation

QUESTION 31
What happens when you set up detailed scheduling with the finite scheduling mode Insert Operation?
Note: There are 2 correct answers to this question.

Scheduling of an operation takes place as close as possible to the desired date.

Sequencing on multiactivity resources is automatically updated.

Neighboring operations can be moved in both directions in order to create a slot.

Changes are automatically implemented in the complete collective order.

QUESTION 32
Which of the following automation options can you use for production orders? Note: There are 2 correct answers to this question.

You can use trigger points to automatically create rework orders via confirmations.

You can use mass processing to set production orders to technically complete.

You can use the production scheduling profile to automatically set orders to technically complete.

You can use mass processing to read PP master data for production orders.

QUESTION 33
Under what circumstances can you change the material type for a material if stocks reservations or purchasing documents exist? Note: There are 2 correct answers to this question.

The quantity value updates are the same.

The same batch management level is used.

The same base unit of measure is used.

The same account category is used.

QUESTION 34
Which of the following elements does MRP take into account during net requirement calculation? Note:
There are 2 correct answers to this question.

Forecast key figures

Safety Stock

Maximum stock level

Purchase orders

QUESTION 35
You want to use capacity availability checks for production orders.
Which settings have to be made for this?
Note: There are 2 correct answers to this question.

The Relevant for Finite Scheduling indicator must be set.

The scope of check must be defined in Customizing.

A checking rule must be assigned to the work centers.

An overall profile must be assigned in the checking control.

QUESTION 36
Which of the following questions do you have to answer before you start creating a bill of material (BOM)? Note: There are 2 correct answers to this question.

In which storage location is the BOM required?

Is the material type allowed in the BOM?

Which base unit of measure does the material have?

What status does the BOM have?

QUESTION 37
Advanced Planning uses master data and transaction data from SAP S/4HANA In which data objects can you set the Advanced Planning flag?
Note: There are 2 correct answers to this question.

Work Center

Production Version

Material

plant

The Advanced Planning flag is a field that indicates whether a data object is relevant for planning with Production Planning and Detailed Scheduling (PP/DS) in SAP S/4HANA. PP/DS is a component of Advanced Planning that provides more precise and flexible planning capabilities for critical products and resources. You can set the Advanced Planning flag for the following data objects:
Work Center: This is a master data object that represents a location where operations are performed. A work center can have different capacities, such as machine, labor, or power, that are used for scheduling and capacity planning. You can set the Advanced Planning flag for a work center to enable it for PP/DS planning. This means that the work center can be used as a resource in PP/DS and its capacity can be optimized by PP/DS heuristics or optimization tools.
Material: This is a master data object that represents a product or a component that is produced, procured, or consumed in a business process. A material can have different views, such as basic data, MRP, sales, or production, that contain different attributes and parameters for planning and execution. You can set the Advanced Planning flag for a material to enable it for PP/DS planning. This means that the material can be planned with exact times and quantities in PP/DS and its availability can be checked by PP/DS pegging.
The production version (B) and the plant (D) are not data objects that can have the Advanced Planning flag. The production version is a master data object that defines the combination of a bill of material (BOM) and a routing or a production process model (PPM) for a material. The production version does not have a separate flag for PP/DS, but it inherits the flag from the material and the work center. The plant is an organizational unit that represents a physical location where materials are produced or stored. The plant does not have a flag for PP/DS, but it is assigned to a location in PP/DS that represents the geographical or logical grouping of plants for planning purposes. Reference: https://blogs.sap.com/2018/02/12/ppds-for-sap-s4hana-advanced-planning-a-powerful-planning-and-scheduling-tool/
https://learning.sap.com/learning-journeys/explore-integrated-business-processes-in-sap-s-4hana-/advanced-planning_ae824eb6-4bf8-4720-a48f-ba86929a14de

QUESTION 38
What determines whether the planned independent requirements in dem management are consumed by other requirements? Note: There are 2 correct answers to this question.

Order type

Requirements profile

Requirements type

Planning strategy

QUESTION 39
How can a material availability check be triggered automatically for a production order? Note: There are 2 correct answers to this question.

By capacity planning

By order confirmation

By order release

By mass processing

Leave a Reply Cancel reply