Latest PD1-001 Actual Free Exam Questions Updated 861 Questions [Q515-Q537]

4/5 - (2 votes)

Latest PD1-001 Actual Free Exam Questions Updated 861 Questions

Free PD1-001 Exam Braindumps certification guide Q&A

NEW QUESTION 515
Which of the fol owing cleaning solutions should be used whenever the exposure lamp or the fuser lamps have been touched with a technicians fingers?

Alcohol

Water

Glass cleaner

Rubber conditioner

NEW QUESTION 516
A customer wants to turn off their network printer when leaving the office to save energy. To avoid communication problems after the customer turns the printer on, which of the following solutions should the technician recommend?

Enable SNMP

Switch to a USB connection

Configure a static IP address

Enable DHCP

NEW QUESTION 517
Which of the following is used to adjust the exposure on a scanner?

Image processor

The mirror

The scanner speed

Exposure lamp voltage

NEW QUESTION 518
Which of the following failed components would cause the fuser unit to overheat?

Thermostat

Thermistor

Pawls

Bal bearing

NEW QUESTION 519
A customer brought an ink dispersion printer into the service facility. The unit wil not print in black but prints in color with no issues. The technician decided to replace the print head, carriage assembly, and logic PCB all at the same time. The device is still having the same problem. The technician should have followed which of the following troubleshooting methodologies?

Observe, test/ analyze, establish theory, validate, implement

Observe, validate, test / analyze, establish theory, implement

Test / analyze, observe, validate, establish theory, implement

Observe, establish theory, test / analyze, implement, validate

NEW QUESTION 520
During the developing stage of the laser/LED print process:

a uniform charge is applied to the photoconductive surface.

the toner is fixed to the media with heat and pressure.

the toner is transferred from the photoconductor to the media.

the toner is attracted to the latent image.

NEW QUESTION 521
Which of the following is a type of removable memory card?

PCB card

SCSI card

SD card

IDE card

NEW QUESTION 522
Which of the following components are used to rotate mechanisms (e.g. gears or belts)? (Select TWO).

Solenoids

Clutches

Sensors

Motors

Photointerruptor

NEW QUESTION 523
During the purging stage of ink dispersion printing:

the heads and nozzles are cleaned.

print file is removed from the queue.

excess ink is removed from the print image.

media is ejected from the feed path.

NEW QUESTION 524
After instal ing a large capacity paper source upgrade, the customer is unable to select the new trays from the print window. Which of the following should the technician advise the customer to do?

Change the device name for the network.

Select the new tray manual y from the operator panel.

Reset the machines NVRAM.

Configure the print driver for the upgrade.

NEW QUESTION 525
Which of the following failed components would be MOST likely responsible for the charge unit not being powered?

HVPS

Circuit breaker

Laser unit

LVPS

NEW QUESTION 526
Which of the following electrical components utilizes infrared LEDs to detect switching or a change of state?

Resistor

Capacitor

Sensor

Switch

NEW QUESTION 527
Which of the following could contribute to excessive mis-feed problems? (Select TWO).

Curl

Humidity

Brightness

Color

Size

NEW QUESTION 528
Which of the following describes purging?

It is the process of cleaning nozzles and ejectors in an ink dispersion printing system.

It is the process of clearing excess toner off the electrostatic surface in a laser/LED printing system.

It is the process of a vacuum preparing the print bed before the application of liquid color in a solid/block media printing system.

It is the process of eliminating waste ink produced during the printing process in an ink dispersion printing system.

NEW QUESTION 529
Which of the following components wil tend to slip or not properly engage if it becomes damaged?

Clutch

Magnetic switch

Relay

Sensor

NEW QUESTION 530
When a technician needs to troubleshoot a powered laser unit, which of the fol owing safety guidelines must they adhere to?

Remove all jewelry and do not place any reflective objects in the laser path.

Securely tape open the laser shutter and remove the photoconductor unit.

Remove all safety door switches from the laser unit.

Remove all jewelry and remove the photoconductor.

NEW QUESTION 531
Al of the following are protocols that can be used to deliver a scanned image from the scanner to the PC EXCEPT:

DHCP.

FTP.

SMB.

SMTP.

NEW QUESTION 532
A photo-reflective sensor typically detects:

velocity.

paper presence.

fuser temperature.

inertia.

NEW QUESTION 533
Which of the following are types of logical network ports on a printer? (Select TWO).

LPT

LPR

RAW

SCSI

CAT5

NEW QUESTION 534
The technician servicing a MFP suspects that the fuser lamp may have failed. Which of the fol owing steps will confirm this?

Hold the lamp up to the light to see if the filament is intact.

Replace the lamp with a new one.

Check the lamps continuity using an ohmmeter.

Plug the lamp directly into an outlet, bypassing the MFPs internal components.

NEW QUESTION 535
Which of the following copy defects would result from a single large black spot of contamination on a single mirror?

Overall dark copy quality

Overall light copy quality

Black streaks on the copy

Ghosting on the copy

NEW QUESTION 536
A technician is called back to a client for an issue that was repaired the day before. The client is very upset that their unit is broken again. Which of the following is the BEST way to respond to the client on arrival?

The technician should ask what the client did to the unit after they left, why it is broken again and what the client was doing to it to make it malfunction again. Ask the client to demonstrate exactly how they damaged the device.

The technician should show up at the clients site and avoid them completely until they have had a chance to look at the device and resolve the error. Then they should get the client; show them the now working device and how to use the device.

The technician should show empathy for the users situation and for the inconvenience to the user and/or their staff. The technician should then communicate that they will make every effort to resolve their issue as quickly as possible.

The technician should show empathy for the users situation and the inconvenience that the downtime has caused. The technician should then advise the client that this device is very old and that they will continue to experience the problem until they upgrade to a new unit.

NEW QUESTION 537
Which of the following is used for incoming email traffic?

LDAP

SMTP

ISIS

POP3

PD1-001 Certification Overview Latest PD1-001 PDF Dumps: https://www.prepawaytest.com/CompTIA/PD1-001-practice-exam-dumps.html

Leave a Reply Cancel reply