300-730 Actual Questions Answers Pass With Real 300-730 Exam Dumps [Q103-Q121]

4.3/5 - (3 votes)

300-730 Actual Questions Answers Pass With Real 300-730 Exam Dumps

300-730 Dumps Prepare Your Exam With 240 Questions

Cisco 300-730 certification exam covers a wide range of topics, including the implementation of secure protocols, VPN technologies, and different authentication methods. Candidates will be tested on their ability to configure and troubleshoot VPN connections, as well as their knowledge of security policies and best practices. They will also be required to demonstrate their understanding of encryption techniques, network security threats, and mitigation strategies.

Cisco 300-730 exam covers a wide range of topics, including VPN protocols, encryption algorithms, authentication methods, and VPN deployment models. 300-730 exam also evaluates the candidate’s understanding of the different VPN technologies, such as site-to-site VPNs, remote access VPNs, and DMVPN. Additionally, the exam assesses the candidate’s ability to configure and troubleshoot VPNs using Cisco devices.

NEW QUESTION 103
Which IKE identity does an IOS/IOS-XE headend expect to receive if an IPsec Cisco AnyConnect client uses default settings?

*$SecureMobilityClient$*

*$AnyConnectClient$*

*$RemoteAccessVpnClient$*

*$DfltlkeldentityS*

NEW QUESTION 104
Where is split tunneling defined for IKEv2 remote access clients on a Cisco router?

IKEv2 authorization policy

Group Policy

virtual template

webvpn context

NEW QUESTION 105
Refer to the exhibit.

Which two commands under the tunnel-group webvpn-attributes result in a Cisco AnyConnect user receiving the AnyConnect prompt in the exhibit? (Choose two.)

group-url https://172.16.31.10/General enable

group-policy General internal

authentication aaa

authentication certificate

group-alias General enable

NEW QUESTION 106
An engineer is implementing the FlexVPN solution on a Cisco IOS router. The router must only terminate VPN requests and must not initiate them. Additionally, the interface must support VPNs from other routers and Cisco AnyConnect connections. Which interface type must be configured to meet these requirements?

point-to-point GRE tunnel interface

multipoint GRE tunnel interface

static virtual tunnel interface

virtual template interface

NEW QUESTION 107
Which method dynamically installs the network routes for remote tunnel endpoints?

policy-based routing

CEF

reverse route injection

route filtering

NEW QUESTION 108
Refer to the exhibit. An IKEv2 site-to-site tunnel between an ASA and a remote peer is not building successfully. What will fix the problem based on the debug output?

Ensure crypto IPsec policy matches on both VPN devices.

Install the correct certificate to validate the peer.

Correct crypto access list on both VPN devices.

Specify the peer IP address in the tunnel group name.

NEW QUESTION 109
Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.)

registration reply

redirect

resolution reply

registration request

resolution request

NEW QUESTION 110
Refer to the exhibit.

An engineer has configured a spoke to connect to a FlexVPN hub. The tunnel is up, but pings fail when the engineer attempts to reach host 192.168.200.10 behind the spoke, and traffic is sourced from host 192.168.100.3, which is behind the FlexVPN server. Based on packet captures, the engineer discovers that host 192.168.200.10 receives the icmp echo and sends an icmp reply that makes it to the inside interface of the spoke. Based on the output in the exhibit captured on the spoke by the engineer, which action resolves this issue?

Add the aaa authorization group cert list default default command to the spoke ikev2 profile.

Add the route set remote ipv4 192.168.200.0 255.255.255.0 command to the hub authorization policy.

Add the aaa authorization group cert list default default command to the hub ikev2 profile.

Add the route set remote ipv4 192.168.100.0 255.255.255.0 command to the spoke authorization policy.

NEW QUESTION 111
Which parameter is initially used to elect the primary key server from a group of key servers?

code version

highest IP address

highest-priority value

lowest IP address

NEW QUESTION 112
Refer to the exhibit. Which two tunnel types produce the show crypto ipsec sa output seen in the exhibit? (Choose two.)

crypto map

DMVPN

GRE

FlexVPN

VTI

NEW QUESTION 113
Refer to the exhibit. What is a result of this configuration?

Spoke 1 fails the authentication because the authentication methods are incorrect.

Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.

Spoke 2 fails the authentication because the remote authentication method is incorrect.

Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.

NEW QUESTION 114
A network engineer is implementing a FlexVPN tunnel between two Cisco IOS routers. The FlexVPN tunnels will terminate on encrypted traffic on an interface configured with an IP MTU of
1500, and the company has a security policy to drop fragmented traffic coming into or leaving the network. The tunnel will be used to transfer TFTP data between users and internal servers. When the TFTP traffic is not traversing a VPN, it can have a maximum IP packet size of 1500.
Assuming the encrypted payload will add 90 bytes, which configuration allows TFTP traffic to traverse the FlexVPN tunnel without being dropped?

Set the tunnel IP MTU to 1500.

Set the tunnel tcp adjust-mss to 1460.

Set the tunnel IP MTU to 1400.

Set the tunnel tcp adjust-mss to 1360.

NEW QUESTION 115
Which two dynamic routing protocols work over FlexVPN for failover redundancy? (Choose two.)

IGRP

IS-IS

RIP

OSPF

EIGRP

NEW QUESTION 116
Refer to the exhibit.

Which type of VPN is being configured, based on the partial configuration snippet?

GET VPN with COOP key server

GET VPN with dual group member

FlexVPN load balancer

FlexVPN backup gateway

NEW QUESTION 117
Which IKEv2 feature minimizes the configuration of a FlexVPN on Cisco IOS devices?

IKEv2 Suite-B

IKEv2 proposals

IKEv2 profiles

IKEv2 Smart Defaults

NEW QUESTION 118
A network engineer has almost finished setting up a clientless VPN that allows remote users to access internal HTTP servers. Users must enter their username and password twice: once on the clientless VPN web portal and again to log in to internal HTTP servers. The Cisco ASA and the HTTP servers use the same Active Directory server to authenticate users. Which next step must be taken to allow users to enter their password only once?

Use LDAPS and add password management to the clientless tunnel group.

Configure auto-sign-on using NTLM authentication.

Set up the Cisco ASA to authenticate users via a SAML 2.0 IDP.

Create smart tunnels for the HTTP servers.

NEW QUESTION 119
In order to enable FlexVPN to use a AAA attribute list, which two tasks must be performed? (Choose two.)

Define the RADIUS server.

Verify that clients are using the correct authorization policy.

Define the AAA server.

Assign the list to an authorization policy.

Set the maximum segment size.

NEW QUESTION 120
Refer to the exhibit. Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?

Lower the tunnel MTU.

Enable perfect forward secrecy.

Specify the application networks in the remote identity.

Make an adjustment to IPSec replay window.

NEW QUESTION 121
An administrator is deciding which authentication protocol should be implemented for their upcoming Cisco AnyConnect deployment. A list of the security requirements from upper management are: the ability to force AnyConnect users to use complex passwords such as C1$c0451035084!, warn users a few days before their password expires, and allow users to change their password during a remote access session. Which authentication protocol must be used to meet these requirements?

LDAPS

RADIUS

Kerberos

TACACS+

New 300-730 Dumps – Real Cisco Exam Questions: https://www.prepawaytest.com/Cisco/300-730-practice-exam-dumps.html

Leave a Reply Cancel reply